background image

Getting Started And Settings

Getting Started

Your Detector

Nothing comes close to a Cobra

®

5

Installation

Your Detector

4

English

1.

Place the detector on the dashboard to find a location 
where the unit has a clear, level view of the road. 
The angle can NOT be adjusted after mounting.

2. Remove the paper backing

from one (1) side of the
hook-and-loop fastener.

3. Attach the pad to the

dashboard at your chosen
location and remove the 
other paper backing.

4. Attach the detector to the

hook-and-loop fastener. 
You can remove and
reattach the unit as 
often as you like.

6. Plug the power cord 

into the detector.

7. Plug the cigarette lighter

adapter on the power 
cord into your vehicle’s
cigarette lighter.

Dashboard Mounting

System Ready

Power On

Testing

Voice Alert

On-Off/

Volume Control

Rotate clockwise 

(away from you)

NOTE
In some vehicles, power is supplied to the cigarette lighter 
even while the ignition is Off. If this is the case with your 
vehicle, you should turn Off or unplug your detector when
parking for lengthy periods.

Secondar

Icons

To Turn On The Unit And Adjust The Audio Volume

Rotate the On-Off/
Volume 
control 
clockwise (away 
from you).

Tone

Voice

Visual Display

Three (3) beeps

Testing, then 
three (3) beeps

System Ready, then

Voice Alert

The display will
cycle through the
user mode settings
(Voice Alert,
Spectre 1 and VG-2,
IntelliMute, City X
or Highway status).

Start-up is complete when the display continuously 
shows the letters indicating the current user settings 
(

c

City mode, 

h

Highway mode, 

i

IntelliMute On)

Start-Up Complete

h

Settings

When changing the Settings on your detector, please keep in mind:

Buttons can have multiple functions.

Depending on your choice of Voice Alert or Tone Alert mode, you will
hear either voice messages or tones confirming changes in settings. 

All settings will be stored in memory when the power is 
turned Off and recalled when the power is turned back On.

Summary of Contents for Pro 9580

















Reviews: