background image

Customer Assistance

Warranty

Introduction

Operation

Scrolling Through the Mode Function

By scrolling through the 

Mode 

function, you will be able to 

select or turn 

on

preferred features of your microTALK

®

radio.

When scrolling through the 

Mode

function, your radio features 

will be displayed in the same predetermined order:

Set Privacy Code
Set NOAA All Hazards Radio Channels 
Set Vox On/Off 
Set Vox Sensitivity
Set Channel Scan
Set Privacy Code Scan
Set Call Tones
Set Roger Beep On/Off

CTCSS Privacy Codes

CTCSS 

(Continuous Tone Coded Squelch System) is an advanced

tone coding system allowing you to select one of 38 privacy codes
to reduce interference from other users on the channel.

If you are using a privacy code, both radios must be tuned 
to the same channel and privacy code to communicate. Each
channel will remember the last privacy code you selected.

To select a privacy code:
1.

After selecting a channel, press the 

Mode/

Power

button until the small numbers next 

to the channel number flash on the LCD.

2.

Press the 

Channel Up

or 

Channel Down

button to select a privacy code. You can 
hold the 

Channel Up

or 

Channel Down

button for fast advance.

3.

When your desired privacy code is displayed:

a.

Press the 

Mode/Power

button to enter the

new setting and proceed to other functions.

b.

Press the 

Lock

button to enter the new

setting and return to 

Standby 

mode.

c.

Do not press any buttons for 15 seconds 
to enter the new setting and return to

Standby 

mode.

Privacy Code

Mode/Power

Channel Button

Mode/Power

Using Your Radio

Operation

Speaker/Microphone/Charge Jack

Your microTALK

®

radio can be fitted with an external 

Speaker/Microphone

, freeing your hands for other tasks. 

This same jack also serves as the connecting point for 
a wall charger/adapter.

To attach a speaker/microphone:
1.

Open the speaker/microphone/charge 
tab on top of your microTALK

®

radio.

2.

Insert the plug into the speaker/
microphone/charge jack.

To connect a wall charger/adapter:
1.

Open the speaker/microphone/charge 
tab on top of your microTALK

®

radio.

2.

Insert the wall charger/adapter plug 
into the speaker/microphone/charge jack.

See Page 1 for batteries and charger
instructions.

microTALK

®

Range

Your range will vary depending on terrain and conditions.

In flat, open country your radio will 
operate at maximum range.
Buildings and foliage in the path of the 
signal can reduce the range of the radio.
Dense foliage and hilly terrain will further 
reduce the range of the radio.
On FRS Channels 8 through 14, your radio
automatically switches to low power, which will
limit the range the radio can communicate.

Remember, you can achieve maximum
range by using maximum range
extender. See page 5 for details.

Reduced Range

Reduced Range

Maximum Range

Speaker/Microphone
/Charge Jack

English

6

7

Nothing 

Comes Close to a Cobra

®

9509-PR650-2WX VP-D-FINALC  3/29/06  3:43 PM  Page 6

Summary of Contents for PR 650WX












Reviews: