®
23801 E. La Palma Ave., Yorba Linda, Ca 92887 Ph. 714.692.8180, Fax. 714.692.5016
www.cobrausa.com
05/10
1
®
Instruction Manual >
606-0102B
Page 1 of 2
DOCUMENT NO. 0017
REV. A
*
Cobra recommends you always wear a helmet while riding. Please never operate your motorcycle while under
the influence of alcohol and/or drugs. Enjoy the new look of your motorcycle and please ride safely.
Items Supplied >
1 – INTAKE COVER W/ INTAKE SCREEN ASSEMBLY
1 – K&N® VENTURI AIR FILTER
1 – BILLET VELOCITY STACK
1 – MOUNTING PLATE
1 – SUPPORT BRACKET
1 – INTAKE GASKET
2 – O-RING, SILICONE
2 – BREATHER BOLT, 3/8”-16 X 1”
3 – BOLT, 1/4”-20 X 7/8”, BUTTONHEAD W/ LOCK PATCH
3 – BOLT, 1/4”-20 X 5/8”, HEX FLANGE
3 – LOCK WASHER, 1/4” TOOTHED
Application(s) >
HARLEY:
SOFTAIL
2000-10
ROCKER
2008-10
DYNA
2000-10
Read all instructions carefully and completely before installing your new POWRFLO
TM
Intake.
1.
Remove the allen bolt from the center of the stock air cleaner to remove the cover. Remove the (3)
bolts securing the formed bracket located on top of the air filter. Then remove and discard the air filter,
air box and seals/gaskets.
2.
Remove and discard the (2) stock breather bolts and (2) stock o-rings from the cylinder heads; save
the breather hoses for reuse during installation.
3.
Insert (3) supplied 1/4”-20 x 3/4” buttonhead bolts with lock washers through the mounting holes in
the velocity stack and mounting plate. While holding that assembly together with one hand, insert the
(2) breather hoses through the mounting plate and into the velocity stack with the hoses rotated
outward, as shown in Figure 1. Make sure the hoses are bottomed out in the back of the velocity
stack.
4.
Join together the assembly from Step 3 with the supplied support bracket and gasket then start
threading the (3) buttonhead bolts into the throttle body, but do not tighten.
VELOCITY
STACK
SUPPLIED
INTAKE
GASKET
MOUNTING
PLATE
FIGURE 1
(3) 1/4”-20 x 3/4”
BUTTONHEAD
BOLTS W/
LOCK PATCH
(2) SUPPLIED
O-RINGS
(2) SUPPLIED
BREATHER
BOLTS
(2) STOCK
BREATHER
HOSES
SUPPORT
BRACKET
(3) LOCK
WASHERS
VELOCITY STACK BACKSIDE
BREATHER SLOTS
ORIENT TO TOP
WHEN ASSEMBLED
