- 14 -
CAUTION:
before changing mowing height, stop mower and disconnect spark plug cable.
Your mower is equipped with a central height adjustment lever offering 7 height positions.
The height (the blade to the ground) can be adjusted from 25mm to 75mm (7 height positions). (Fig.12)
The lowest adjustment
：
25mm (position 1),the highest adjustment
：
75mm (position 7).
1. Stop mower and disconnect spark plug cable before changing mower cutting height.
2. The central height adjustment lever offers you 7 different height positions.
To change the height of cut, squeeze adjuster lever toward the wheel, moving up or down to selected height.
Fig.12
8. MAINTENANCE INSTRUCTIONS
SPARK PLUG
Use only original replacement spark plug. For best results, replace the spark plug every 100 hours of use.
9. LUBRICATION INSTRUCIONS
CAUTION:
DISCONNECT SPARK PLUG BEFORE SERVICING.
1. WHEELS-Lubricate the ball bearings in each wheel at least once a season with a light oil.
2. ENGINE-Follow engine manual for lubrication instructions.
10. CLEANING
CAUTION:
Do not hose engine. Water can damage the engine or contaminate the fuel system.
1. Wipe deck with a dry cloth.
2. Hose under the deck by tilting the mower so that the spark plug is up.
10.1 ENGINE AIR CLEANER
CAUTION:
Do not allow dirt or dust to clog the air filter foam element. The engine air cleaner element must be serviced
(cleaned) after 25 hours normal mowing. The foam element must be serviced regularly if the mower is used in dry dusty
conditions.
TO CLEAN THE AIR FILTER
1. Press down the two tabs on top of the filter cover. (Fig.13A)
2. Remove the filter cover. (Fig.13A)
3. Wash the filter element in soap and water. (Fig.13B)
DO NOT USE PETROL!
4. Air dry filter element.
5. Place a few drops of SAE30 oil on the foam filter and squeeze tightly to remove any excess oil.
6. Reinstall the filter.
NOTE: Replace the filter if frayed, torn, damaged or unable to be cleaned.
