12
English
13
Using Your Radio
Using Your Radio
Privacy Code Scan
•
Your microTALK radio can automatically scan the
Privacy Codes
(either CTCSS 01 through 38 or DCS 01
through 83) within one channel. Only one set of privacy codes (CTCSS or DCS) can be scanned at a time.
To scan privacy codes:
1.
While in
Standby
mode, press the
Channel Up
or
Channel Down
button to
choose the channel on which you wish to scan privacy codes.
2.
Press the
Scan
button until either the CTCSS or the DCS icon appears on the
display and the privacy code numbers flash on the display.
3.
Press the
Channel Up
or
Channel Down
button to begin scanning privacy
codes within the channel you selected.
During scanning (while receiving an incoming transmission), you can choose
from the following:
a.
Press and hold the
Talk
button to communicate on that channel/privacy
code. Your radio will remain on that channel/privacy code and return to
Standby
mode.
b.
Press the
Channel Up
or
Channel Down
button to resume scanning privacy
codes. If you do not press any button within 10 seconds, your radio will
automatically resume scanning privacy codes.
c.
Press the
Lock
button to return to
Standby
.
Select Channel
Scan Privacy Codes
VO
LUME
CALL
MODE
CHANNEL
SCAN
Scan Button
VO
LUME
CALL
MODE
CHANNEL
SCAN
Mode/Power
Call Tone Setting
VO
LUME
CALL
MODE
CHANNEL
SCAN
Channel Button
Roger Beep Confirmation Tone
•
Your listener will hear an audible tone when you release the
Talk
button. This alerts the other party that
you are finished talking and it is ok for them to speak.
To turn roger beep on and off:
1.
Press the
Mode/Power
button until the
Roger Beep
icon flashes. The current
on
or
off
setting is displayed.
2.
Press the
Channel Up
or
Channel Down
button to select roger beep
on
or
off
.
3.
Choose one of the following:
a.
Press the Mode/Power button to enter the new setting and return to
Standby
mode.
b.
Press the
Lock
button to enter the new setting and return to
Standby
.
VO
LUME
CALL
MODE
CHANNEL
SCAN
Mode/Power
VO
LUME
CALL
MODE
CHANNEL
SCAN
Channel Button
Roger Beep Off
Five Call Tone Settings
•
You can choose between five different
Call Tone
Settings to transmit a call alert.
To change a
call tone setting
:
1.
Press the
Mode/Power
button until the
letter “C” and the current call tone number
(01 through 5) is displayed. The current
call tone will sound for three seconds.
2.
Press the
Channel Up
or
Channel Down
button to hear the other
call tone settings.
3.
Choose one of the following:
a.
Press the
Mode/Power
button to enter the new setting and proceed to
other functions.
b.
Press
Talk
or
Call/Lock
button to enter the new setting and return to
Standby mode.
c.
Do not press any buttons for 15 seconds to enter the new setting and return
to Standby mode.
MT645VP_MANL_ENG.indd 7
8/12/13 2:25 PM
