Intro
Operation
Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution
Warning
Installation
Customer
Assistance
Operating Your Radio
37
Nothing
Comes Close to a Cobra
®
36 English
Intro
Operation
Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution
Warning
Installation
Customer
Assistance
Operating Your Radio
Weather Mode Programming
To Set SAME FIPS Code Programming:
1.
From
Weather Standby
Mode, press
CALL/ENT/SETUP
key
until the display matrix shows
SELECT ALERT:
and
WX,
SAME, or OFF
will be flashing.
2.
Press
Channel Up/Down
buttons to select
SAME
.
The first memory location “A” will be displayed. Up to 10
FIPS codes
can be entered A - J.
3.
Press and release the
CALL/ENT/SETUP
button and the first
FIPS memory A will be displayed. Use the
Channel Up/Down
buttons to select the FIPS memory location A-J.
4.
Press the
Call/Enter/Setup
button to enter geographic weather
locations as identified by
FIPS
(Federal Information Processing
System) area in the United States.
Intro
Operation
Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution
Warning
Installation
Customer
Assistance
NOTE
FIPS
codes identify geographic areas in the United
States as shown on the Internet website:
http://www.nws.noaa.gov/nwr/indexnw.htm.
5.
The display will show “ ------,” or last entered
FIPS
code. One (1) digit in display will be flashing.
6.
Press
Channel Up/Down
button to select first digit.
7.
Press and release
Call/Enter/Setup
button to advance to
next digit code. Press and release
MEM/ESC
button to
back up. Repeating, press and release of the
MEM/ESC
button, will back up to the top level.
8.
Continue steps 5 to 7 until all six (6) digits are entered.
9.
Press the
Call/Enter/Setup
button to save the entered digits.
Weather Mode Programming
MEM
SAME
VOX
HI
ROG
VHF
GMRS
T
RX
U
Call/Enter/Setup Button
SAME
Select Weather Alert
To Set SAME FIPS Code Programming
continued
:
10.
Use the
Channel Up/Down
buttons to select:
•
OFF
- entered FIPS code is not active or,
•
ON
- entered FIPS code is active.
11.
Press the
Call/Enter/Setup
button to save the memory.
12.
Repeat steps 3 through 10 to enter up to 10 FIPS codes
in memory.
13.
When all of the codes are entered, use the
Channel
Up/Down
buttons to move to memory K.
14.
Press the
Call/Enter/Setup
button and select:
•
ON
- all entered FIPS codes are set active,
•
OFF
- all entered FIPS codes are set inactive, or
•
OK
- all entered FIPS codes are correctly entered,
some On and some Off.
15.
At least
one
FIPS code must be entered and made active
(ON) or the
SAME
mode is disabled. The radio will warn
you if no FIPS codes are on.
16.
Press the
Call/Enter/Setup
button to exit back to
weather standy.
MEM
SAME
Enter FIPS Code
MEM
SAME
Code Entered
MEM
SAME
All On
SAME Disabled