Cobra MR HH 500 FLT BT EU, Owner'S Manual, Page: 13 / 35

21 Nothing Comes Close to a Cobra ®
Setup Mode Programming
VHF Marine Radio Protocols Operating Your Radio
20 English
Setup Mode Programming
Rewind Enable/Disable
If Rewind is enabled, the last 20 seconds of incoming
audio is recorded and you can play back missed VHF calls
by pressing the
Rewind button.
1. Display will show the Rewind icon flashing and the
matrix will display REWIND ENABLE or DISABLE .
2. Press Channel Up/Down button to select ENABLE
or DISABLE .
3. Press Call/Enter/Setup button to save entry.
ENT SETUP
CALL
MARINE H
Channel Up/Down Button
VHF Marine Radio Protocols Operating Your Radio
ENT SETUP
CALL
MARINE HH50
Channel Up/Down Button
MEM SAME ATIS VOX LOMEDHI
ROG
VHF
T
R
A
B
GMRS
X
C I U
ATIS ID Number Entry
MEM SAME ATIS VOXLOMEDHI
ROG
VHF
T
R
A
B
GMRS
X
C I U
ATIS ID Start Screen
16 TW
SCAN
H M L
ESC
MEM
ENT SETUP
CALL
Channel Down and
SCAN Buttons
2. The LCD will display the ATIS icon. A dash (-), to the
right of the digit “9,” will be flashing for the next entry.
NOTICE
Remember , you only have one (1) attempt to set the
ATIS ID number. Once this number has been entered,
only your Cobra distributor can reset the ATIS ID number.
You can also return the radio to Cobra for reprogramming.
3. Press the Channel Up/Down button to scroll through
the specific ATIS digit being entered.
4. Pressing the Call/Enter/Setup button advances to
the right, one (1) digit, for the next entry.
5. Repeat this input sequence until all nine digits have
been entered. The nine digits will be displayed on the
matrix. The ATIS icon will stop flashing when a
successful ATIS ID entry has been made.
6. Press the Call/Enter/Setup button again, after all
numbers have been entered, to save the ATIS ID
number and return to the Marine Standby mode.
ATIS ID Programming
•
The Automatic Transmission Identification System (ATIS) feature of this Cobra radio
is used to identify marine vessels in some inland waterways of European countries
that require ATIS transmission. An ATIS ID number is required to operate the ATIS
feature. The ATIS ID number is derived from your vessel’s call sign. You must enter
your ATIS ID number into this radio before the ATIS system will become functional.
Please consult your local dealer for questions about local ATIS requirements. The use of
ATIS is prohibited outside the European inland waterways covered by the Basel Agreement.
With this feature activated the vessels ATIS ID number is transmitted after every
push of the Talk button.
To Set the ATIS ID Number:
NOTE
The ATIS ID is a 10-digit number that will always begin
with the number “9.” You will be asked to enter only the
last nine digits. The first digit, “9,” has been
automatically entered for you.
1. With the radio turned Off, press and hold the Channel
Down and SCAN buttons and simultaneously power
On the radio.
MEM SAME ATIS VOX LOMEDHI
VHF
T
R
A
B
GMRS
X
C I U
Rewind Enable
500_VHF_Body_EURO_v8_MRHH330_ENG_Body 9/3/13 4:34 PM Page 20