background image

VibrAlert

®

 and Call Alert

Your microTALK

®

 radio can alert you to incoming signals by sounding an 

audible call tone or an audible tone with VibrAlert

®

 

To change call settings:

 

1.

 Press the 

Mode

 button until the 

Call Setting

 icon is  

 

  shown on the display. The current setting (“0”  

 

  v ring, “1” ring only) is displayed.

 

2.

 Press the 

Up

 or 

Down

 button to 

 

  change the call setting.

 

3.

 Choose one of the following:

  

a.

 Press the 

Mode

 button to enter the new setting  

 

    and proceed to other functions.

  

b.

 Press 

Talk 

button to return to 

 

  

Standby

 mode. 

  

c. 

Do not press any buttons for 6 seconds to  

 

    return to 

Standby

 mode.

Note: VibrAlert

®

 will be suspended during charging

Roger Beep Confirmation Tone

Your listener will hear an audible tone when you release the 

Talk

 button. 

This alerts the other party that you have finished talking and it is OK for 
them to speak.

Key Tone 

Key Tone

 is an audible tone which will sound each time a button is 

pressed.

9

10

Voice Activated Transmit (VOX)

In 

VOX

 mode, your microTALK

®

 radio can be used “hands-free,” automatically

transmitting when you speak. You can set the 

VOX

 sensitivity level to fit the

volume of your voice and avoid transmissions triggered by background noise. 
 

To turn VOX mode on or off:

 

1. 

Press the 

Mode 

button until the 

VOX

 

  icon shown on the display. The current 

On

 or 

Off

 

  setting is displayed.

 

2.

 Press the 

Up

 or 

Down 

 

  button to turn VOX 

On

 or 

Off.

 

3.

 Choose one of the following:

  

a.

 Press the 

Mode 

button to enter the 

 

    new setting and proceed to other functions.  

  

b.

 Press the 

Talk 

button to return to 

 

  Standby 

mode. 

To set VOX sensitivity:
1.

 Press the 

Mode 

button until the 

VOX

 icon

  flashes and the current sensitivity level is displayed.

2.

 Press the 

Up 

or

 Down

 

  button to change the setting.

3.

 Choose one of the following:

 

a.

 Press the 

Mode 

button to enter the

    new setting and proceed to other functions.
 

b.

 Press the 

Talk

 button to return to

  Standby 

mode.

 c.

  Do not press any buttons for 6 seconds to

    return to 

Standby

 mode.

The current VOX sensitivity level is

displayed with letters “L” and a Number 1

through 5, with Number 5 being the most

sensitive level and Number 1 being the

least sensitive level.

Call Tone On/

Vibrate Off

Call Tone On/

Vibrate On

VOX  Icon

Mode Button

Up/Down Button

VOX Sensitivity Level

Mode Button

Up/Down Button

Summary of Contents for microTALK PX880











Reviews: