Cobra microTALK PR 3500 DX, Owner'S Manual

Page: 12 / 15

Customer Assistance Warranty Introduction
19 Nothing comes close to a Cobra ®
Operation
18 English
Mode Functions
VibrAlert ® and Call Tones
•
Your microTALK ® radio can alert you to incoming signals by
sounding an audible call tone, by vibrating silently or both.
To change call settings:
1.
Press the Mode/Lock
button until the Call Setting
icon flashes on the display.
The current setting (“01”
v ring, “02” vibrate
only or “03” ring only)
is displayed.
2. Press the Channel Up or
Channel Down button to
change the call setting.
3. Choose one of the following:
a. Press the Mode/Lock
button to enter the new setting
and proceed to other functions.
b. Press the Enter/Hi•Low button to enter the
new setting and return to Standby mode.
10 Call Tone Settings
•
You can choose from 10 different call tone settings to transmit
a unique call alert.
To change a call tone setting:
1.
Press the Mode button until the letter “C” and
the current call tone number (01 through 10)
is displayed.
2. Press the Channel Up or Channel Down
button to hear the other call tone settings.
3. Choose one of the following:
a. Press the Mode/Lock button to enter the
new setting and proceed to other functions.
b. Press the Enter/Hi•Low button to enter the
new setting and return to Standby mode.
Roger Beep Confirmation Tone
•
Roger Beep is an audible tone that your listener will hear when you
release the Talk button. This alerts the other party that you are
finished talking and it is OK for them to speak.
To turn roger beep on or off:
1.
Press the Mode button until the Roger Beep
icon flashes on the display. The current on
or off setting is displayed.
2. Press the Channel Up or Channel Down
button to select roger beep on or off .
3. Choose one of the following:
a. Press the Mode/Lock button to enter
the new setting and proceed to other
functions.
b. Press the Enter/Hi•Low button to enter the
new setting and return to Standby mode.
Keystroke Tones
•
With Keystroke Tones turned on , your radio will sound
beeps each time you press a button or change a setting.
To change keystroke tones:
1.
Press the Mode/Lock button until the
Keystroke Tones icon flashes on the display.
The current on or off setting is displayed.
2. Press the Channel Up or Channel Down
button to turn keystroke tones on or off .
3. Choose one of the following:
a. Press the Mode/Lock button to enter the
new setting and return to Standby mode.
b. Press the Enter/Hi•Low button to enter the
new setting and return to Standby mode.
Operation
Mode/Lock Button
Call Tone Setting
Channel Buttons
Mode/Lock Button VibrAlert ® + Ring
VibrAlert ® Only
Ring Only
Channel Buttons
Mode/Lock Button
Keystroke Tones On
Channel Buttons
Mode/Lock Button
Roger Beep On
Channel Buttons