Customer Assistance
Warranty
Introduction
Operation
Turning on Your microTALK
®
Radio
•
Press and hold the
Mode/Power
button until you
hear a series of audible tones indicating the radio
is
on
.
Your microTALK
®
radio is now in
Standby
mode,
ready to receive transmissions. The radio is
always in
Standby
mode except when the
Talk
,
Call
or
Mode/Power
buttons are pressed.
Battery Low
•
When battery power is low, the
Battery Low
icon
will blink. Your batteries should be replaced or
recharged, if using rechargeable batteries.
Auto Battery Save
•
If there are no transmissions within 10 seconds,
the radio will automatically switch to
Battery
Save
mode and the
Power Saver
icon will flash
in the display. This will not affect the radio’s
ability to receive incoming transmissions.
Communicating with Another Person
•
1.
Press and hold the
Talk
button.
2.
With the microphone about two inches
(5 cm) from your mouth, speak in a
normal voice.
3.
Release the
Talk
button when you are
finished talking and listen for a response.
You cannot receive incoming calls while
pressing the
Talk
button.
Both radios must be tuned to the
same channel to communicate.
3
Mode/Power
Battery Low
Talk Button
Battery Save Mode
Two Inches (5 cm)
from Mouth
PR260-2WX VP-D-FINALB_With_Edits 5/26/06 11:23 AM Page 3
