Cobra microTALK MU1500, Owner'S Manual

Page: 8 / 12

Reset all channels with factory default privacy codes
1. Power off the radio. Press and hold the PF1 button
and turn the Talk button, and turn the Power On/Off
knob to turn on the radio simultaneously.
2. 2 consecutive beeps following with a message “ Code
Memory OFF ” prompted, all the channels on the radio
has been reset to factory default privacy codes
successfully.
PC Program Software Setting
Running MU1500 PC software on your computer, by setting the key functions
in PC software -> Key Settings, you will be able to select or turn on preferred
features of your microTALK
®
radio.
Default Key function
PF1 key
function
Press: Check Power
Hold : VOX ON/OFF
PF2 Key function
Press: Squelch Off
Hold: RB ON/OFF
Voice Activated Transmit (VOX)
In
VOX
mode, your microTALK ®
radio can be used “hands-free,” automatically
transmitting when you speak.
To turn VOX mode on or off:
1.
During Standby mode, press and hold PF1 button for at least 3 seconds to
turn VOX On or Off, the current VOX status is prompted.
2.
Once the
VOX
is turned
on
,
Red
LED flashes after
Green
LED flash every 5
seconds.
To set VOX sensitivity:
1.
Run MU1500 PC Software on your computer.
2.
Function Setup ->
VOX
Setting, tick on “
VOX function
” and select “
VOX
Level ” for your radio. The value would be from 1 to 9. VOX 9 is the most
sensitive level and VOX 1 is the least sensitive leve.
Operation
More Functions
10 11
ON/OFF Knob