Customer Assistance
Warranty
Introduction
17
Operation
Channel Scan
•
Your microTALK radio can automatically scan channels.
To scan channels:
1.
Press the
Mode
button until the
Scan
icon and the channel numbers
flash on the display.
2.
Press the
Channel Up
or
Channel Down
button to begin scanning channels.
The radio ignores specific privacy
codes while scanning channels.
The
Scan
icon will continue to be displayed
when scan is
on
. Your radio will continue to
scan all channels and stop if an incoming
transmission is detected. Your radio will
remain on that channel for 10 seconds.
While setting channel scan, if you do not
press any buttons for 15 seconds, your radio
will automatically return to
Standby
mode on
the channel or channel/privacy code displayed
before you entered mode functions.
Mode Button
Channel Buttons
Scanning Channels
LI4900WX.qxd:9512-PR3900-2DXVP 11/6/06 9:56 AM Page 17
