Customer Assistance
Warranty
Introduction
15
Operation
14
Mode Functions
Operation
To recall a stored memory channel location:
1.
Press the
Mode
button until the
Memory
icon
and the memory location number flash on the
display.
2.
Press the
Channel Up
or
Channel Down
button to select a memory location
(0 through 9).
If a location has been programmed
before, its associated channel/privacy
code will be shown on the display.
3.
Press the
Talk
button to return to
Standby
mode on the selected memory location.
A memory location can be reprogrammed
at any time it is displayed and flashing.
Press the
Lock/Enter
button to begin.
While recalling a stored memory location,
if you do not press any buttons for 15 seconds,
your radio will automatically return to
Standby
mode on the channel/privacy code displayed
before you entered mode functions.
6.
Choose one of the following:
a.
Press the
Channel Up
or
Channel Down
button to select a CTCSS privacy code
(01 through 38) for the channel.
b.
Press the
Lock/Enter
button to
switch from CTCSS to DCS. The DCS
icon and privacy code numbers will
flash on the display. The
Channel Up
or
Channel Down
button can then be
used to select a DCS privacy code
(01 through 104) for the channel.
If “OFF” flashes in place of the privacy
code numbers, a privacy code is
already set in the opposite (CTCSS
or DCS) system. Press the
Channel Up
or
Channel Down
button to cancel
the opposite code and select a privacy
code from the active system for the
selected channel.
7.
Choose one of the following:
a.
Press the
Lock/Enter
button to enter
the channel/privacy code in the selected
memory location. Radio then proceeds to
next Memory location, which will blink.
b.
Press the
Mode
button to
enter the channel/privacy code in
the selected memory location and
proceed to other functions on the
channel/privacy code displayed
before you entered mode functions.
c.
Press the
Talk
button to enter the
channel/privacy code in the selected
memory location and exit mode functions.
Upon release of the
Talk
button, the
radio will enter
Standby
mode on the
channel/privacy code just entered.
Channel Buttons
Memory Icon
Mode Button
10293_LI7200WX_vB.qxd 9/5/07 10:55 AM Page 14
