Cobra microTALK CXR925 Owner'S Manual Download

Page: 15 / 17

Roger Beep Confirmation Tone

•

Roger Beep

is an audible tone that your listener will hear when

you release the

Talk

button. This alerts the other party that you

are finished talking and it is OK for them to speak.

To turn roger beep on or off:
1.

Press the

Mode

button until the

Roger Beep

icon flashes on the display.

The current

off

setting is displayed.

Press the

Channel

Down

button to select roger beep

off

Choose one of the following:

Press the

Mode

button to enter

the new setting and proceed to other

functions.

Press the

Lock/Enter

button to enter the

new setting and return to

Standby

mode.

Keystroke Tones

•

With

Keystroke Tones

turned

, your radio will sound

beeps each time you press a button or change a setting.

To change keystroke tones:
1.

Press the

Mode

button until the

Keystroke

Tones

icon flashes on the display. The

current

off

setting is displayed.

Press the

Channel

Down

button to turn keystroke tones

off

Choose one of the following:

Press the

Mode

button to enter the new

setting and return to

Standby

mode.

Press the

Lock/Enter

button to enter the

new setting and return to

Standby

mode.

VibrAlert

and Call Alert

•

Your microTALK

radio can alert you to incoming signals by

sounding an audible call tone, by vibrating silently or both.

To change call settings:
1.

Press the

Mode

button

until the

Call Setting

icon

flashes on the display.

The current setting (“01”

v ring, “02” vibrate

only or “03” ring only)

is displayed.

Press the

Channel

Down

button to

change the call setting.

Choose one of the following:

Press the

Mode

button

to enter the new setting

and proceed to other functions.

Press the

Lock/Enter

button to enter the

new setting and return to

Standby

mode.

10 Call Tone Settings

•

You can choose from 10 different call tone

settings to transmit a unique call alert.

To change a call tone setting:
1.

Press the

Mode

button until the

letter “C” and the current call tone number

(01 through 10) is displayed.

Press the

Channel

Down

button to hear the other call tone settings.

Choose one of the following:

Press the

Mode

button to enter the new

setting and proceed to other functions.

Press the

Lock/Enter

button to enter the

new setting and return to

Standby

mode.

Mode Functions

Operation

Customer Assistance Warranty

Operation

Roger Beep On

Keystroke Tones On

Mode Button

Call Tone Setting

Mode Button

VibrAlert

+ Ring

VibrAlert

Only

Ring Only

Mode Button

LI 7300

Channel Button

LI 7300

Channel Button

LI 7300

Channel Button

LI 7300

Channel Button

CXR925_MANL.indd 24-25

7/15/09 5:12 PM

Summary of Contents for microTALK CXR925


















Search results

Summary of Contents for microTALK CXR925

Reviews:

Related manuals for microTALK CXR925

Brands by name

Popular brands

Cobra microTALK CXR925, Owner'S Manual

Search results

Summary of Contents for microTALK CXR925

Reviews:

Related manuals for microTALK CXR925

Brands by name

Popular brands