Cobra MICROTALK CXR700C Owner'S Manual Download

Page: 8 / 18

Customer Assistance

Warranty

Introduction

Operation

Mode Functions

Operation

Set DCS Privacy Codes

•

To select a DCS privacy code:
1.

After selecting a channel, press the

Mode

button until the DCS icon appears and the
small numbers flash on the display
(01 through 104).

NOTE

If CTCSS is turned

at the channel

selected, the display will flash the
DCS icon and “OFF.” To switch from
CTCSS to DCS, press the

Channel Up

Channel Down

button while the

display is flashing “OFF.” The display
will then show the small numbers
flashing and you will then be able
to proceed to step 2.

Press using the

Channel Up

Channel Down

button to select a DCS privacy code. You can
hold the

Down

button for fast advance.

When your desired DCS privacy code is
displayed, choose one of the following:

Press the

Mode

button to enter the new

setting and proceed to other functions.

Press the

Lock/Enter

button to enter the

new setting and return to

Standby

mode.

Do not press any buttons for 15 seconds
to enter the new setting and return to

Standby

mode.

Mode Button

Channel Button

DCS Privacy Code

Nothing

Comes Close to a Cobra

Set CTCSS Privacy Codes

•

To select a CTCSS privacy code:
1.

After selecting a channel, press the

Mode

button until the CTCSS icon appears

and the small numbers flash on the display
(01 through 38).

NOTE

If DCS is turned

at the channel

selected, the display will flash the
CTCSS icon and “OFF.” To switch from
DCS to CTCSS, press the

Channel Up

Channel Down

button while the

display is flashing “OFF.” The display
will then show the small numbers
flashing and you will then be able
to proceed to step 2.

Press using the

Channel Up

Channel

Down

button to select a CTCSS privacy

code. You can hold the

Down

button for fast advance.

When your desired CTCSS privacy code is
displayed, choose one of the following:

Press the

Mode

button to enter the new

setting and proceed to other functions.

Press the

Lock/Enter

button to enter the

new setting and return to

Standby

mode.

Do not press any buttons for 15 seconds
to enter the new setting and return to

Standby

mode.

Mode Button

Channel Button

CTCSS Privacy Code

Summary of Contents for MICROTALK CXR700C



















Search results

Summary of Contents for MICROTALK CXR700C

Reviews:

Related manuals for MICROTALK CXR700C

Brands by name

Popular brands

Cobra MICROTALK CXR700C, Owner'S Manual

Search results

Summary of Contents for MICROTALK CXR700C

Reviews:

Related manuals for MICROTALK CXR700C

Brands by name

Popular brands