39
Nothing comes close to a Cobra
®
Advanced Operation
38 English
Advanced Operation
Tri-Watch
Tri-Watch gives you one-button access to scan the three locations of most
importance to you. Channel 16 will always be one of the scanned locations.
The other two (2) locations will be stored in the radio. They can be edited
and/or recalled for future engagements of Tri-Watch mode.
NOTE
The radio must be Squelched for Tri-Watch to function.
See page 29 for Squelch procedure.
To Program Or Edit The Tri-Watch Locations:
1. Press and hold the Tri-Watch button for three (3)
seconds. The Tri-Watch and Memory icons on
the LCD will be turned On.
2. Press the Channel Up or Channel Down button
to move to the channel you want to enter into
Tri-Watch location one.
3. Press the Tri-Watch button. You will hear a
two (2) beep confirmation signal.
4. Press the Channel Up or Channel Down button
to move to the channel you want to enter into
Tri-Watch location two.
5. Press the Tri-Watch button. You will hear a
two (2) beep confirmation signal and the Memory
icon will disappear from the LCD. The radio will
immediately engage Tri-Watch (see page 37
for further details).
To Enter Tri-Watch Mode:
1. From Standby mode, press the Tri-Watch button.
The Tri-Watch icon will appear on the LCD and the radio
will scan among Channel 16, Tri-Watch location one, and
Tri-Watch location two. A signal on any one of the three (3)
locations will stop the scan for ten (10) seconds to allow
you to listen to the traffic on that location.
To Exit Tri-Watch Mode:
1. Press the Tri-Watch button.
The icon will disappear from the LCD and the
radio will return to Standby mode status.
During An Incoming Transmission,
You Can Choose From The Following:
a. Press the Talk button to remain on that
Tri-Watch location and return to Standby mode.
b. Press the Channel Up or Channel Down button
to resume scanning Tri-Watch locations.
If you do not press any buttons within ten (10)
seconds, your radio will automatically resume
scanning Tri-Watch locations.
During Scanning (While Not Receiving A Transmission),
You Can Choose From The Following:
a. Press the Talk button to communicate on the
last Tri-Watch location scanned and return to
Standby mode.
b. Press the Channel Up or Channel Down button
to change scan direction.
Operating Your Radio
Operating Your Radio
Channel Up/Down
Tri-Watch Button
Tri-Watch Button
Tri-Watch and Memory Icons
Tri-Watch Icon
a
Talk or Channel Up/Down
b
