![Cobra LRH5024V Owner'S Manual Download Page 11](http://html.mh-extra.com/html/cobra/lrh5024v/lrh5024v_owners-manual_2631046011.webp)
11
Important:
To protect the battery against deep
discharging, when the battery charge is low,
the hedge trimmer will automatically switch off
via a protective circuit. The hedge trimmer will
stop.
Do not continue to press the on/off switch after an
automatic shut-off of the hedge trimmer. The
battery may be damaged if excessively discharged.
Recharge the battery before continuing to use the
hedge trimmer.
6. STARTING AND OPERATING
Step 1
:
Firstly press the power key (Source) until
the “ECO” light is illuminated
;
Step 2
:
Pre the lock (1) then press down the
handle trigger (2), the blades will operate at a low
speed
;
Step 3
:
If you want to change from the low speed
position to high speed position
,
press the
“TURBO” button. The hedge trimmer will now
operate at high speed.
To switch back to the slower speed press the
“ECO” button.
Please Note:
When releasing the switch and the
motor stops, there may be a small spark visible
from the motor housing. The spark is caused by
the motor brake engaging.
The best cutting effect is achieved when holding
the blade at an angle to the hedge of approx. 15°.
The opposite rotating knives cut on both sides,
and it is therefore possible to trim the hedge in
both directions.
The sides of the hedge are trimmed using curve
shaped movements from the bottom and upwards.
Source
TURBO
ECO