background image

27

26

General Specifications

General Specifications

FRS/GMRS Frequency 
Allocation and Compatibility

Important:

Please note that Cobra GMRS models with 15 Channels 

may designate different channel numbers for the same frequency.
For example, a Cobra 15 Channel GMRS model would need to be 
tuned to Channel 11 in order to communicate with a 22 Channel 
GMRS tuned to Channel 15. Please refer to the chart below for 
channel/ frequency number compatibility.

A = Channel No. for 22 Channel FRS/GMRS Models
B = Channel No. for 15 Channel GMRS Models
C = Type of Radio Service
D = Frequency in MHz
E = Power Output

A

B

C

D

E

FRS/GMRS 

462.5625

High or Low 

2

FRS/GMRS

462.5875

High or Low

3

FRS/GMRS 

462.6125

High or Low 

FRS/GMRS 

462.6375

High or Low 

FRS/GMRS 

462.6625

High or Low 

FRS/GMRS 

462.6875

High or Low  

FRS/GMRS 

462.7125

High or Low 

FRS 467.5625

Low 

9 FRS 

467.5875

Low

10 FRS

467.6125

Low 

11 FRS 

467.6375

Low

12 FRS 

467.6625

Low

13 FRS 

467.6875

Low 

14 FRS 

467.7125

Low

15 

11 

GMRS 

462.5500

High or Low 

16 

GMRS 

462.5750

High or Low 

17 

12 

GMRS 

462.6000

High or Low 

18 

GMRS 

462.6250

High or Low 

19 

13 

GMRS 

462.6500

High or Low 

20 

10 

GMRS 

462.6750

High or Low 

21 

14 

GMRS 

462.7000

High or Low 

22 

15 

GMRS 

462.7250

High or Low 

LICENSING

For Products Used in Canada

Industry Canada Notice

Operation is subject to the following two conditions: 1) this device
may not cause interference, and 2) this device must accept any
interference, including interference that may cause undesired
operation of the device.

«IC» before the equipment certification number signifies that the
Industry Canada technical specifications were met. It does not
guarantee that the certified product will operate to the user’s
satisfaction.

For Products Used in the U.S.A.

FCC Licensing Required

This two-way radio operates on GMRS (General Mobile Radio Service)
frequencies which require an FCC (Federal Communications
Commission) license. A user must be licensed prior to operating on
channels 1 through 7 or 15 through 22, which comprise the GMRS
channels of this radio. Serious penalties could result for unlicensed
use of GMRS channels; operation of this radio is subject to additional
rules specified in 47 C.F.R. Part 95.

Licensed users will be issued a call sign by the FCC, which should be
used for station identification when operating this radio. GMRS users
should also cooperate by engaging in permissible transmissions only,
avoiding channel interference with other GMRS users, and being
prudent with the length of their transmission time.

For licensing information and application forms, please call the FCC
Hotline at 800-418-FORM. Request form #159 and form #605.
Questions regarding the license application should be directed to the
FCC at 888-CALL-FCC. Additional information is available on the FCC’s
website at www.fcc.gov.

Intro

Operation

Customer
Assistance

Warranty

Notice

Main Icons

Secondary Icons

This device complies with part 15 of the FCC Rules. Operation is subject 
to the following two conditions: 1) This device may not cause harmful
interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation.

FCC Warnings: Replacement or substitution of transistors, regular diodes or
other parts of a unique nature, with parts other than those recommended by
Cobra may cause a violation of the technical regulations of part 95 of the FCC
rules, or violation of type acceptance requirements of part 2 of the rules.

Operation

Intro

Operation

Customer
Assistance

Warranty

Notice

Main Icons

Secondary Icons

FCC Licensing and
Product Service Questions

Intro

Operation

Customer
Assistance

Warranty

Notice

Main Icons

Secondary Icons

Customer Assistance

LI4900WX.qxp  11/21/2006  2:19 PM  Page 26

Summary of Contents for LI 4900WXC


















Reviews: