background image

Customer Assistance

Warranty

Introduction

5

Nothing 

Comes Close to a Cobra

®

Operation

4

English

Using Your  Radio

Channels

To select a channel:

With the radio 

on

, select any of the 

22 channels by pressing the 

Channel Up

or 

Channel Down

button. 

Both radios must be tuned to the 
same channel to communicate.

Channels 1 through 7 are shared by FRS and
GMRS. Channels 8 through 14 are FRS only.
Channels 15 through 22 are GMRS only.

See page 25 for FRS/GMRS frequency
allocations and compatibility charts.

Listening for a Response

When you are finished talking:

Release the 

Talk

button to receive incoming

transmissions. Your microTALK

®

radio is

always in 

Standby 

mode while the 

Talk

or 

Call

buttons are not pressed.

Call Button

To alert another person that you are calling:

Press and release the 

Call

button. 

The other person will hear a two second 
call tone. This tone is used only to establish
voice communications.

See page 23 on how to select from 
10 available call tone settings.

Low Power Icon

Hi Power Icon

Operation

Hi•Low Button

Selectable High•Low Power Output

When in close proximity to another party or
during favorable conditions, you can switch 
from 

High

to 

Low Power

to extend battery life.

This feature applies to GMRS Channels 
1 through 7 and 15 through 22 only.
Channels 8 through 14 operate
exclusively on low power.

To toggle between high and low power:

Press and release the 

Hi•Low

button.

When using Channels 1 through 7 and 
15 through 22 on high power, the 

Hi

icon 

will be visible on the display.

When using those channels on low power 
and on Channels 8 through 14, the 

Low

icon 

will be visible on the display. 

Display Illumination

To illuminate your display:

Press and release the 

Light/Max Range

button to illuminate the display for 
10 seconds.

Light/Max Range

Call Button

Listening

Channel Buttons

Channel Number

Summary of Contents for LI 3900DX




















Reviews: