3
CARTS AND TRAILERS
Parts List and Tools Required
M10 x 20mm Bolts (10)
M10 Hex Nut (10)
M10 Lock Washer (10)
Axle Plate (1)
Tub (1)
Socket/Wrench Set
The following steps show how to assemble
the pull style dump cart.
NOTE
: Fasteners needed to secure the axle
plate to the tub are attached to the axle plate.
Photo shows the axle removed from the axle
plate. Axle is shipped inserted into the axle
plate and can be removed during installation if
desired.
With assistance, place the tub on its side
1.
on a flat surface and hold or brace in
position.
NOTE:
You must be able to access the
inside and underside of the tub to attach
the axle plate.
Align the holes of axle plate with the holes
2.
of the tub as shown in diagram A.
Secure the axle plate to the tub using the
3.
ten (10) M10x20 bolts, M10 flat washers,
M10 lock washers, and M10 nuts.
Insert all bolts through the dump cart tub
with the head of the bolts to the inside of
the tub
. The nuts and lock washers are
to the outside against the axle plate as
shown in diagram B.
Tighten all bolts.
4.
1
ATTACH AXLE PLATE
A
B
Phillips Screwdriver
