Cobra ESD9200 How To Use Manual Download

Page: 14 / 15

Introduction

Introduction

Congratulations! You have just purchased the
most sophisticated RADAR/LASER DETECTOR
available today. This booklet contains instructions
and information designed so that you will be able
to understand how the Cobra ESD™-9200 works
and how radar and (LIDAR) laser are used. Enjoy
your Cobra ESD-9200 Radar/Laser Detec tor and

drive safely

Federal Law Governing Use of
Radar Detectors

It is not against Federal Law to receive radar
transmissions on your COBRA Radar Detector.
The Communications Act of 1934 guarantees
your right to receive radio transmissions on
any frequency. Local laws that contravene the
Communications Act of 1934,while illegal,may
be enforced by your local law enforcement offi-
cials until and unless they are prohibited from
doing so by Federal Court action.

WARNING:

Before leaving your car, make sure

that you conceal your radar detector. This will
reduce the possibility of break-in and theft of
your unit.

Included with your ESD-9200

Windshield Bracket

Hook and Loop Material

Power Cord

M i c ro Ta l k

Radar/Laser Detector

Model ESD-9200

O pe rating Instru ctions for your Co b ra
9 Band Ext ra Se n s o ry De te ct i o n

Part No. 480-298-P-001

For te c h n i cal assistance, please call our Au to m a ted Help Desk which can assist

you by answering the most fre q u e n t ly asked questions about Co b ra prod u ct s.

(773) 889-3087

24 hours a day, 7 days a week.

A Consumer Service Representative can be reached through this same number 8:00 am - 8:00 pm,

Monday through Friday, CST.

Technical assistance is also available on-line in the Frequently Asked Questions (FAQ) section at

www.cobraelec.com or by e-mail to [email protected]

If you think you need service call 1.773.889.3087

“If your product should require fac tory service please call Cobra first before sending your unit in.
This will ensure the fastest turn-around time on your repair.”

You may be asked to send your unit to the Cobra factory. It will be necessary to furnish the follow-
ing in order to have the product serviced and returned.
1. For Warranty Repair include some form of proof-of-purchase, such as a mechanical reproduction

or carbon or a sales receipt. If you send the original receipt it cannot be returned.

2. Send the entire product.

3. Enclose a description of what is happening with the unit.Include a typed or clearly print name

and address of where the unit is to be returned.

4. Pack unit securely to prevent damage in transit. If possible, use the original packing material.

5. Ship prepaid and insured by w ay of a traceable carrier such as United Parcel Service (UPS) or First

Class Mail to: Cobra Factory Service, Cobra Electronics Corporation,6500 W. Cortland St., Chicago,
IL 60707.

6. If the unit is in war ranty, upon receipt of your unit it will either be repaired or exchanged

depending on the model. Please allow approximately 3 to 4 weeks before contacting us for
status. If the unit is out of war ranty a letter will automatically be sent informing you of the
repair charge or replacement charge. If you have any questions, please call 1.773.889.3087 for
assistance.

If You Think You Need Service

and Strobe Alert™

Use of this product is not intend-
ed to, and does not, ensure that
the motorist and any passenger
will not be involved in a traffic
accident. It is only intended to
alert the motorist that an emer-
gency or service vehicle equipped
with a CODE 3,Strobe (Opticom*
or Tomar Preemption System)
or Cobra Safety Alert Transmitter
is in the area as defined by the
range of the product. Please call
your local Fire/Police department
to verify if coverage exists in your
area.Motorists are expected to
exercise all due caution while
using this product, and to ob-
serve and follow all applicable
traffic laws. Operators of emer-
gency or service vehicles are also
expected to exercise
all due caution while using this
product, and to observe and
follow all applicable traffic laws.