3
Installation
Your new detector comes with our latest
EZ Mag Mount
™
. Simply slide the detector onto the mounting
bracket fully and that’s it. To remove the detector from the mount, simply pull the detector off the mount.
Mounting Tips:
•
Center of windshield between driver and passenger.
•
Ensure clear view of road ahead and sky above.
•
Avoid windshield wipers and heavily tinted areas.
To mount the detector in your vehicle:
1
Remove backing from EZ Mag Mount.
2
Firmly press EZ Mag Mount onto windshield and flip locking clamp to secure.
3
Tilt the display end of the detector slightly upward and engage with the mounting bracket.
The EZ Mag Mount™ magnet holds the detector firmly in place.
4
To adjust view, loosen thumb wheel and adjust angle of mounting bracket. Tighten thumb
wheel to secure.
5
To remove the detector, simply lift the display end of the detector upward. The detector will release
from the mount.
6
To remove mount from windshield, release locking clamp and pull tab on top of EZ Mag Mount.
EZ Mag Mount Care Instructions:
To clean your EZ Mag Mount, simply rinse under warm water, gently wipe off any debris and allow
to air dry.