Contact Us
11
Cobra Electronics Corporation
6500 W. Cortland St., Chicago, IL 60707
Cobra One Year Limited Warranty
What this warranty covers:
Cobra USA, Inc. (“Cobra”) warrants your
Product against all defects in materials and workmanship.
For how long:
One (1) year from the date of original purchase from an
authorized Cobra dealer.
What we will do:
If a breach of warranty occurs, Cobra, at its discretion,
will either repair or replace your Product free of charge.
What we will not do:
Cobra will not pay shipping charges that you incur
for sending your Product to us.
What you must do to maintain this warranty:
Show original proof of
purchase or receipt from an authorized Cobra dealer.
Warranty exclusions:
This warranty does not apply to your product
under any of the following conditions: 1. The serial number has been
removed or modified. 2. Your product has been subjected to misuse
or damage (including water damage, physical abuse, and/or improper
installation). 3. Your product has been modified in any way. 4. Your
receipt or proof-of-purchase is from a non-authorized dealer or internet
auction site, including E-bay, U-bid, or other non-authorized resellers.
5. You are not the original purchaser of the Product from an authorized
dealer or did not receive it as a gift from the original purchaser of the
Product from an authorized dealer.
To obtain service:
1. Contact Cobra (1-800-964-3138) to obtain a Return
Authorization Number. 2. Properly pack your Product and include: your
name, complete return address, written description of the problem with
your Product, daytime telephone number, and a copy of the original
proof of purchase or receipt. 3. Label the outside of the package clearly
with your Return Authorization Number. Ship the Product pre-paid
(insured, for your protection) to: Cobra Electronics Corp., 6500 W.
Cortland St., Chicago, IL 60707.
LIMITATION OF WARRANTY:
The obligations set forth above are
Cobra’ sole obligations and your exclusive remedy. Cobra makes no
other express warranty. Any implied warranty of merchantability or
fitness for a particular purpose that may be applicable to the Product
is limited in duration to the duration of this warranty. Some States do
not allow limitations on how long an implied warranty lasts, so the
above limitation may not apply to you. Cobra SHALL NOT BE LIABLE
FOR CONSEQUENTIAL, SPECIAL OR INCIDENTAL DAMAGES INCLUDING,
WITHOUT LIMITATION, DAMAGES ARISING OUT OF THE USE, MISUSE OR
MOUNTING OF THE PRODUCT. Some States do not allow the exclusion
or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you. Cobra is not responsible
for products lost in shipment between the owner and our service center.
Other legal rights: This warranty gives you specific legal rights, and you
may also have other rights which vary from State to State.
©2019 Cobra®, iRadar®, and SmartShield® are trademarks of Cobra USA, Inc..
Manufactured in the Philippines. Features, specifications and prices subject to
change without notice.
FCC NOTE: Modifications not expressly approved by the manufacturer could
void the user’s FCC granted authority to operate the equipment.
FCC ID: QL4M6. CONTAINS FCC ID:QKLBT2
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received including interference that
may cause undesired operation.
800.964.3138 • Cobra.com
Software Updates
Dual Pro 360’s red light and speed camera
database is easily updated using our exclusive
detector software tools found on our web site.
Firmware, or the operating software for the
detector, can also be updated using these tools.
In order to have access to these updates, you must
register your Dual Pro 360 at www.Cobra.com.
Once registered, you will receive email
notifications that updates are now available for
your database or firmware. To handle your
software and DEFENDER updates you need to
connect your Dual Pro 360 to a computer first.
You can connect Dual Pro 360 to a computer via
USB/USB Mini B cable.
Restore Factory Settings
To restore Dual Pro 360 to it’s original factory
settings, press and hold MRK and BRT while
turning the power on. A
Restored
message will
display, acknowledging the reset.
Notes for Programming
To view serial number and software revision press
MRK and MUTE while powering on detector.
