- 8 -
1
AIR
CLEA
Oil Level Check
1. Check the oil with the engine stopped and level.
7. Oil filler cap/dipstick
Max: upper limit
Min: lower limit
2.
Remove the oil filler cap/dipstick and wipe it clean with a clean rag to prevent dirt deposits contaminating fuel.
3. Insert the oil filler cap/dipstick into the oil filler neck as shown, but
do not screw it in, then remove it to check the oil level.
4. If the oil level is near or below the lower limit mark on the dipstick, remove the oil filler cap/dipstick, and fill with the
recommended oil to the upper limit mark (bottom edge of .the oil fill hole). Do not overfill.
5. Reinstall the oil filler cap/dipstick.
6. Clean up any oil you may have spilled
Oil Change
This engine is delivered without oil, be sure to put oil in the engine before the starting. Use a clean, detergent
and high quality oil SAE30 and API. SG, SH OR SJ classification.
Drain the engine oil when the engine is warm, warm oil drains quickly and completely.
7. Oil filler cap/dipstick
A: Sealing washer
B: Drain bolt
1. Turn the fuel valve to the OFF position to reduce the possibility
of fuel leakage
2. Place a suitable container next to the engine to catch the used oil.
3. Remove the drain bolt and drain the oil into the container by
slightly tipping the engine toward the oil filler cap/dipstick.
Please dispose of used motor oil in a manner that is compatible with the environment. We suggest you take used oil in a
sealed container to your local recycling center or service station for reclamation. Do not throw it in the bin or pour it on the
ground
or down a drain.
4. With the engine in a level position, fill to the upper limit mark
on the dipstick with the recommended oil (see below). Engine
Oil Capacity:
0.63 US qt (0.60L)
Running the engine with a low oil level can cause engine damage.
Reinstall the oil filler cap/dipstick securely.