Operation
Customer Assistance Warranty
Introduction
1
Nothing
Comes Close to a Cobra
®
Remove Belt Clip
Pull Up Lock Latch
Insert Batteries
Caring for Your microTALK
®
Radio
•
Your microTALK
®
radio will give you years of trouble-free service
if cared for properly. Handle the radio gently. Keep the radio away
from dust. Never put the radio in water or in a damp place. Avoid
exposure to extreme temperatures.
Installing Batteries
•
To install or replace batteries:
1.
Remove belt clip by releasing belt clip
latch and sliding clip up.
2.
Pull up on the battery door latch to remove the
battery compartment cover.
3.
Insert the supplied four AAA rechargeable
batteries or non-rechargeable alkaline
batteries. Position batteries according to
polarity markings.
4.
Replace battery compartment cover and
belt clip.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc), or
rechargeable (Ni-Cd, Ni-MH, etc.) batteries.
To charge batteries in radio:
1.
Check to see that the batteries have been
inserted properly.
2.
Insert the wall charger/adapter into the charge
jack located at the top of the radio.
3.
Plug the wall charger/adapter into electrical
outlet.
Use only the supplied rechargeable batteries and charger for
recharging your Cobra microTALK radio.
Cobra recommends your radio is turned off while being charged.
Non-rechargeable alkaline batteries can also be used in your radio.
Radio Charger Jack
CXT240_MANL_OR_9509-PR260 WX vB 4/23/13 3:51 PM Page 1
