A
Appendix A: Gas Type Conversion
©
Moffat Ltd, September 2008
29
Revision 1
Cobra Series CT6 Gas Griddle Toaster
Gas Specifications
- Non UK Only:
- UK Only:
(*)NOTE:
•
The burner operating pressure is to be measured at the manifold test point with both
burners operating at the 'High Flame' setting.
•
NAT, LPG & Butane Only - The operating pressure is ex-factory set and is not to be
adjusted, apart from when converting between gasses, if required.
•
TOWN GAS Only - The burner operating pressure is to be adjusted using the Town Gas
adjustable gas regulator supplied.
•
Refer to the ‘Gas Conversion and Specifications' section of this manual for further details.
Natural Gas
LP Gas
(Propane) Butane Gas
Town Gas
Main Burner Injectors
Ø 2.10mm
Ø 1.30mm
Ø 1.20mm
Ø 3.80mm
Pilot Burner Injectors
0.35
0.23
0.60
Low Fire Adjustment
1
turn out (c.c.w.)
½
turn out (c.c.w.)
2
turns out (c.c.w.)
Operating Pressure
1.0 kPa (*)
2.5 kPa (*)
0.63 kPa (*)
Main Burner Aeration
Shutter
Fully Open
Fully Open
Gas Regulator Cap
Screw
Adjustable Regulator
(Adjust to the Burner
Operating Pressure)
Fully Open
Natural Gas
(G20)
Propane
(G31)
Main Burner Injectors
Ø 2.10mm
Ø 1.30mm
Pilot Burner Injectors
0.35
0.23
Low Fire Adjustment
1½
turns out (ccw)
½
turn out (ccw)
Operating Pressure
10 mbar (*)
26 mbar (*)
Gas Regulator Cap
Screw
Main Burner Aeration
Shutter
Fully Open
Fully Open
