background image

17

Nothing comes close to a Cobra

16 English

Limited 1-Year Warranty 

For Products Purchased in the U.S.A.

Cobra

®

Electronics Corporation warrants that its Cobra

®

Power

Inverter, and the component parts thereof, will be free of defects 
in workmanship and materials for a period of one (1) year from the
date of first consumer purchase. This warranty may be enforced by
the first consumer purchaser, provided that the product is utilized
within the U.S.A. 

Cobra

®

will, without charge, repair or replace, at its option,

defective Power Inverters, products or component parts upon
delivery to the Cobra

®

Factory Service department, accompanied

by proof of the date of first consumer purchase, such as a
duplicated copy of a sales receipt. 

You must pay any initial shipping charges required to ship the
product for warranty service, but the return charges will be at
Cobra

®

’s expense, if the product is repaired or replaced under

warranty. This warranty gives you specific legal rights, and you
may also have other rights which may vary from state to state.

Exclusions: This limited warranty does not apply:

1. To any product damaged by accident.

2. In the event of misuse or abuse of the product or 

as a result of unauthorized alterations or repairs.

3. If the serial number has been altered, defaced, or removed.

4. If the owner of the product resides outside the U.S.A.

All implied warranties, including warranties of merchantability 
and fitness for a particular purpose are limited in duration to the
length of this warranty. Cobra

®

shall not be liable for any incidental,

consequential or other damages; including, without limitation, to
damages resulting from loss of use or cost of installation. 

Some states do not allow limitations on how long an implied
warranty lasts and/or do not allow the exclusion or limitation 
of incidental or consequential damages, so the above limitations
may not apply to you.

For products purchased outside the U.S.A.

Please contact your local dealer for warranty information.

Maintenance

Very little maintenance is required to keep the inverter operating
properly. The exterior of the unit should be cleaned periodically
with a damp cloth to prevent accumulation of dust and dirt. At the
same time, tighten the screws on the DC input terminals. Be sure
vents and fans are free of dust or debris.

Product Service

If you have any questions about operation or installing your new
Cobra

®

product, or if you are missing parts…

Please call Cobra

®

first! 

DO NOT RETURN THIS PRODUCT TO THE STORE! 
See customer assistance on page A1.

If your product should require factory service, please call Cobra

®

first before sending your power inverter. This will ensure the
fastest turn-around time on your repair. You may be asked to 
send your power inverter to the Cobra

®

factory. 

It will be necessary to furnish the following to have the product
serviced and returned.

1. For Warranty Repair include some form of proof-of-purchase,

such as a mechanical reproduction or carbon copy of a sales
receipt. If you send the original receipt, it cannot be returned;  

2. Send the entire product.
3. Enclose a description of what is happening with the power

inverter. Include a typed or clearly printed name and address
of where the power inverter is to be returned.

4. Pack power inverter securely to prevent damage in transit. 

If possible, use the original packing material.

5. Ship prepaid and insured by way of a traceable carrier 

such as United Parcel Service (UPS) or First Class Mail to
avoid loss in transit to:

Cobra Factory Service, Cobra Electronics Corporation, 
6500 West Cortland Street, Chicago, Illinois 60707 USA.

6. If the power inverter is in warranty, upon receipt of your power

inverter, it will either be repaired or exchanged depending on
the model. Please allow approximately 3 – 4 weeks before
contacting Cobra

®

for status. If the power inverter is out of

warranty, a letter will automatically be sent informing you of
the repair charge or replacement charge.  

If you have any questions, please call 773-889-3087 for assistance.

Warranty 

Warranty

Maintenance and 
Product Service

Customer Assistance

Summary of Contents for CPI 400













Reviews: