manualshive.com logo in svg

Cobra CP-9125, Operating Instructions Manual

Share
Download
Cobra CP-9125 Operating Instructions Manual Download Page 21

To Remove The Belt Clip And 
Install The Slot Cover

Cleaning The Charging Contacts

Clean the two metal charging contacts on both
base and handset with a soft dry cloth on a 
regular basis.

Headset Operation

The headset jack allows use of a headset with

an earspeaker and boom microphone.

37

Spread Right Page

Spread Left Page

36

1

Use the belt clip for
convenience.

Operation

Cobra Customer Service

773.889.3087 
24 hours a day,
seven days a week

Operation

Clean

handset contacts.

Clean

base contacts.

Cleaning The
C h a r g i n gC o n t a c t s

1

2

Headset
Operation

1

Plug

the headset

into the CP-9125
handset.

2

3

3. Put the slot cover in

the slot and press
down.

1. Push the belt

clip lock tab
as shown.

2. Pull the belt

clip up and
out of the
handset.

Position

the

headset com-
fortably on your
head and adjust
the microphone
so it is located
near, but not
touching, your
mouth.

Note

Isopropyl alcohol may be used
for more thorough cleaning.

CP9125manual(6.12)  10/20/98 11:39 AM  Page 42

Summary of Contents for CP-9125


























Reviews:

No comments

Brands by name

Popular brands

Load more brands