background image

2

3

IMPORTANT

To get the full capability of your new Cobra Airwave

®

 Mini, 

please read this manual. It's more than just a 

Bluetooth

®

 

Speaker! 

CHARGING

The Cobra Airwave

®

 Mini has a built-in Li-ion battery (3.7V, 

1600 mAH), so it can be used without connecting to a 
power supply. To charge the battery, follow these steps:
1.  Connect the micro USB connector to the Cobra 

Airwave

®

 Mini micro-USB input.

2.  Plug the USB full-size connector into the micro-

USB input. A common USB type AC charger (DC 
5V, 500mA) or any USB power source.

• 

When the device is charging the LED status 
indicator will be RED. When fully charged the RED 
status indicator LED will go off.

• 

A full charge will last for up to 12 hours of  
normal use.

Volume Down

Volume Up

Micro-USB Charging Point (under flap)

TIP

: Use a 

pen tip to lift 

flap open.

Multi-Button

CARE AND MAINTENANCE

1.  Never try to disassemble or service the product  

by yourself.

2.  Keep the Cobra Airwave

®

 Mini and accessories out 

of reach from children.

3.  Do not expose the Cobra Airwave

®

 Mini to 

temperatures above +55 deg C (+131 deg F). If 
the product is operated in extreme hot or cold 
temperature, the battery capacity is reduced. Use it 
at room temperature for maximum battery capacity. 

Microphone

Wrist Strap

Insert

CWABT300_MANL_vD.indd   2-3

4/16/14   1:51 PM

Summary of Contents for AirWave Mini CWA BT300







Reviews: