Start Up
IMPORTANT!
It is the user’s responsibility to account for the vehicle’s height,
width, length, HAZMAT, and other restrictions while driving.
Always follow posted road signs and be aware of road conditions
when making driving decisions.
Please read the “
Important Safety Information
” included with
your unit.
Power Key
Micro-SD
Card Slot
Mini-USB-
Power Port
Reset Button
To charge the unit, connect either the AC
or DC Power Adapter. The battery light will
illuminate and will take approximately 3
hours to charge. When battery is fully
charged, the red LED will turn
Off
. Once
fully charged the battery will last
approximately 2 hours during normal use.
NOTE:
Turn the unit ON or OFF by pressing the
Power Key
for 2 seconds.
Mount the Unit
You can mount your 8000 PRO HD to the inside of your vehicle’s
windshield using the windshield bracket provided.
• Clean the area where you wish to
position the bracket thoroughly with
glass cleaner.
• Assemble the suction cup bracket.
Slide the mount clip onto the end of the
suction cup arm.
• Place the suction cup and bracket on
the windshield and push the locking
lever towards the windshield to secure
the bracket.
• Adjust the angle of the bracket so that
when the unit is attached to it you
can view the display and operate the
controls safely.
• Do not place the mount in an airbag deployment area.
NOTE:
Mounting your
8000 PRO HD
in close proximity to a CB radio may
interfere with GPS reception. Should you encounter such interference,
position your
8000 PRO HD
as far away from your CB radio as possible.
Printed in China Part No. 480-771-P Version A
Battery Light
8000PRO_HD_QSG_vA.indd 2
2/29/12 4:53 PM
