Start Up
IMPORTANT!
It is the user’s responsibility to account for the vehicle’s height,
width, length, HAZMAT, and other restrictions while driving.
Always follow posted road signs and be aware of road conditions
when making driving decisions.
Please read the “
Important Safety Information
” included with
your unit.
Power Key
Earphone Jack
Micro SD Card Slot
Power Adapter/ Mini
USB Port
Reset Button
To charge the unit, connect the DC Power
Adapter. The battery light will flash red
and will take approximately 3 hours to
charge. Once fully charged the battery
will last approximately 2 hours during
normal use.
NOTE:
Turn the unit ON or OFF by pressing the
Power Key
for 2 seconds.
Mount the 5400 Unit
You can mount your 5400 PRO to the inside of your vehicle’s
windshield using the windshield bracket provided.
• Clean the area where you wish to
position the bracket thoroughly with
glass cleaner.
• Assemble the suction cup bracket.
Slide the mount clip onto the end of the
suction cup arm.
NOTE:
A significant amount of force is
required to snap the mount clip into the
suction cup arm.
• Place the suction cup and bracket on
the windshield and push the locking
lever towards the windshield to secure
the bracket.
• Adjust the angle of the bracket so that
when the unit is attached to it you can view the display and
operate the controls safely.
• Do not place the mount in an airbag deployment area.
NOTE:
Mounting your 5400 PRO in close proximity to a CB radio may
interfere with GPS reception. Should you encounter such interference,
position your 5400 PRO as far away from your CB radio as possible.
Printed in China Part No. 480-820-P Version B
5400PRO_QSG_vB.indd 2
6/5/13 10:54 AM
