background image

QUICK REFERENCE” 

USER MANUAL  

4693-4698

“QUICK REFERENCE” USER MANUAL  4693-4698

4

06DE3798A

 

- 02/13

5. - WARRANTY CONDITIONS

This product is guaranteed for 24 months from the date of purchase, validated by receipt or invoice. The warranty will be null and 
void if the product shows signs of tampering, incorrect installation, damage caused by falling or transport, negligence and anything 
else not imputable to manufacturing defects. 
In the event of improper installation of the system, the manufacturer shall not be liable to compensate for damages:
 
- of any kind and direct or indirect; 
- to things or to persons. 

To bene

fi

 t from warranty coverage, contact your authorized dealer with adequate documentation showing the date of purchase.

The manufacturer shall not be liable for any faults or malfunctions in the anti-theft device and/or in the electrical system of the 
vehicle due to incorrect installation and/or to failure to comply with the indicated technical speci

fi

 cations. The system must only be 

considered as a deterrent agaist theft attempts.

6. - DECLARATION OF CONFORMITY

Cobra Automotive Technologies 
CAT-VA

Declaration of Conformity 

The manufacturer hereby declares, at its sole responsibility, that the product: 

 

  

Description:  

Wireless alarm system for automotive application 

 

Model:   

4600  

             

Type:    

4600 family with siren type 5365 

is in conformity with the essential requirements of the R&TTE Directive 1999/5/EC. 
The product has been tested against the following standards and specifications: 

   

 EMC :  

ECER10

 

 

 

 

    

Health and Safety:  

Relevant tests of ECER116 Regulation 

  

EN50371

    

Radio Spectrum:  

EN 300 220-1 

 

 

EN 300 220-2 

and declares that the: 

TRANSMITTER Model 2781 and Model 7777

conform to the essential requirements of the Radio and Telecommunication Terminal Equipment 

Directive 1999/5/EC in accordance to the following relevant standards and Directives: 

   

Radio:  

EN 300 220-1/2

   

EMC:  

EN 301 489-1/3

   

Health & Safety:  

EN 60950 

  

EN 

50371 

The products are marked with the following CE marking and Notified Body number according to the 
Directive 1999/5/EC: 

2010-09-22 
Dario Parisi 
Products Homologation Engineer 
Tel +39 0332 825111 

4693-4698  “

QUICK REFERENCE” 

USER MANUAL

 

1

4693-4698  “QUICK REFERENCE” USER MANUAL

1. - ARMING AND DISARMING OF THE SYSTEM

To arm the system press the “A” pushbutton of the remote control.

The arming status is con

fi

 rmed by:

•  Vehicle doors locking;
•  Audible signals (if activated);
•  Flashes of the direction lights;
•  LED of the emergency panel illuminated.

The protection features of the system become active after a 25 s arming period has elapsed (when 
the LED of the emergency panel starts blinking).

To disarm the system press the “B” pushbutton of the remote control.

The disarming status is con

fi

 rmed by:

•  Vehicle doors unlocking;
•  Audible signals (if activated);
•  Flashes of the direction lights;
•  LED of the emergency panel OFF.

Note:

 if also the Driver Card (optional) is provided it will be also possible to arm and disarm 

the system by pressing its pushbutton.

The system is delivered with a set of standard functionalities (active functions). The installer is able to activate some more 
functionalities (programmable functions) with an impact on the security and comfort the system will offer. The following are the 
lists of the two groups.

2. - ACTIVE FUNCTIONS

2.1 - Interior protection with ultrasonic volumetric sensor -

 The system protects the vehicle interior with a volumetric ultrasonic 

sensor. Any attempt to get into the vehicle will be detected and the alarm will trigger.

2.2 - Perimetric protection with door open warning diagnostic -

 The alarm will trigger by opening any door, boot and bonnet. 

Should you have left any door opened while arming, the system will signal it by 3 

fl

 ashes of the direction lights and 3 audible signals 

(5 audible signals if the arming/disarming audible signals function has been activated).

2.3 - Cable cutting protection (only for systems with back-up battery siren) -

 The alarm will trigger if the system is not power 

supplied (cutting of cables - battery disconnection) signaling the sabotage. 

2.4 - Engine starting inhibition -

 As soon as the system is armed the engine starting is not be possible anymore. 

2.5 - Arming the system with the volumetric ultrasonic protection disabled -

 This function allows to arm the system leaving 

temporarily disconnected the interior volumetric protection. The protection must be disabled any time you leave somebody or an 
animal in the vehicle. Also if you want to leave any window opened please disable the protection to avoid false alarms. All other 
protections remain active.

Button A >

 

to arm the alarm and to 
lock doors.

B

A

Button B >

 

to disarm the alarm and to 
unlock doors.

B

A

THE FULL USER MANUAL IS AVAILABLE ON-SITE WWW.COBRA AT.COM AT LINK “DOWNLOAD USER 
MANUAL”.

Reviews: