How To Transmit Audio/Video from Your VCR
1.
Connect VCR and transmitter with 3.5mm stereo plug (4 pole) to 3RCA
plug AV cable, just plug RCA plugs to RCA sockets of VCR and plugs 3.5
stereo plug to A/V in port of transmitter. If your VCR has only SCART
socket for audio/video output, you can use a SCART/RCA adapter (not
included) to connect the RCA plug of the transmitter and the SCART socket
of VCR. Please follow the instruction figure below.
2.
Plug one end of the power adapter into the back of the transmitter and the
other end into any 230-volt wall outlet (or 120-volt). Use only the adapter
provided.
3.
If you VCR have only one set of A/V output jacks and you want to use it
with a nearby TV. Connect 75ohm RF coaxial cable (not included) from the
modulator signal OUT port on your VCR to the RF IN port on your TV.
(Note: In order to also view cable programs on that TV, connect your
incoming cable TV source to the IN port of the VCR.)
4.
Locate and orient the transmitter according to the section of this manual
titled
"
Orienting Units for Optimum Performance
"
for best performance of
transmitter.
Units for Optimum Performance for best performance of transmitter.
7
How To Transmit RCA from Your Satellite Receiver
You can transmit audio/video either directly from your satellite receiver, or by
connecting them to your VCR. To transmit directly from your satellite receiver,
follow the instructions below.
1. Connect satellite receiver and transmitter with RCA cable, just plug RCA
plugs to RCA sockets of satellite receiver.
If your satellite receiver has only SCART socket for audio/video output, you
can use a SCART/RCA adapter (not included) to connect the RCA plug of the
transmitter and the SCART socket of VCR. Please follow the instruction
figure below.
2. Plug one end of the power adapter into the back of the transmitter and the
other end into any 230-volt wall outlet (or 120-volt). Use only the adapter
provided.
3. If your satellite receiver or laser disc player has only one set of A/V output
jacks, in this case, please connect 75ohm RF coaxial cable from satellite
receiver's modulator output port to TV RF input terminal.
4..Locate and orient the transmitter according to the section of this manual
titled "Orienting Units for Optimum Performance" for best performance of
transmitter.
8
LINE
I N
OU T1
LIN E
IN
VCR
TV ANT IN
75 OHM Coaxial Cable
LINE
OU T
2
OUT
Recommended TV connection for dual-output VCR's
SCART CONNECTOR A/V CABLE
TV
(must be
A / V IN
RF IN
purchased)
I R
He ad er
Pl a ce
T o
IR
W in do w
Of
V CR
2.5mm Mono Phone
IR Extender
a dap ter
TRANSMITTER
Power
75 OHM Satellite Coaxial Cable
LE T
OU T
1
P OWE R
A C
OU T
2
SATELLITE
RF
OUT
IN
SATELLITE
IN
CABLE
purchased)
C AB LE
S CA RT C ONN ECTOR A / V
V IN
R F I N
A /
TV
(must be
950-2050 MHz
RECEIVER
SCART/RCA Adapter
(Not Included)
IR Extender
2.5mm Mono Phone
IR
H ea d er
Pl ac e
To
I R
Wi nd ow
O f
V CR
3.5mm stereo plug (4 pole) to 3RCA plug cable
adapter
Power
TRANS MITTE R
