Copyright © 2020 Cobra Systems, Inc. All rights reserved
Copyright © 2020 Cobra Systems, Inc. All rights reserved
Loading Striker Labels
TURN OFF
printer; open
cover by
pressing in
on round
white tabs
on either
side of
printer.
Release the
ink carriage
by gently
pulling up
on the green
lever.
Slide the roll
of stickers
onto the
sticker
spindle; line-
up spindle
guides with
spindle slots
and place in
printer.
Make sure
the stickers
travel under
the green
print sensor.
Press ink
carriage
down, back
into printer,
close printer
cover—
you’re ready
to start
printing!
Load the
Reminder
Stickers onto
the spindle,
making sure
the guides
are centered.
Guide the
stickers
through
the printer,
under and
through the
centered
green
guides.
Gently pull
the stickers
through the
printer so
at least one
is coming
out of the
printer.
1
3
5
7
2
4
6
8
NOTE: Make sure both sides of the ink carriage are latched. Always have the Striker
Printer cover closed when powering on.
4