37
Nothing
Comes Close to a Cobra
®
Advanced Operation
Channel Scan Mode
During
Channel Scan
mode, the radio will rapidly switch
from channel to channel through all the channels.
NOTE
The radio must be squelched for
Channel Scan
mode
to function. See page 18 for
Squelch
procedure.
To Enter Channel Scan:
1.
From
Marine Standby
mode, press the
SCAN
button.
The radio will immediately begin to scan the entire
channel map selected in the active channel map.
CHANNEL SCAN
will display on the matrix.
2.
A signal on any channel will stop the scan for 10
seconds to allow you to listen to the traffic on that
location. After 10 seconds, the radio will resume
scanning.
3.
Press the
Channel Up/Down
button to resume
scanning before the 10-second pause has completed
or to change the scan direction.
4.
To EXIT
Channel Scan
mode, press the
SCAN
button
again. The
SCAN
icon will disappear from the LCD
and the radio will return to
Marine Standby
mode.
VHF Marine Radio Protocols
Operating Your Radio
SCAN
ESC
MEM
SCAN Button
MEM
SAME
ATIS
VOX
LO
MEDHI
VHF
T
R
A
B
GMRS
X
C
I
U
SCAN Icon
ENT SETUP
CALL
MARINE HH50
Channel Up/Down Buttons
VHF Marine Radio Protocols
36 English
Advanced Operation
Operating Your Radio
Memory Location Scan Mode
During
Memory Location Scan
mode, the radio will rapidly
scan through all pre-assigned memory channels.
NOTE
The radio must be squelched for
Memory Location
Scan
mode to function. See page 18 for
Squelch
procedure.
NOTE
If there are fewer than two (2) memory locations
programmed in the radio, the
Memory Location Scan
option will not be available. To program at least two
(2) memory locations, see page 34.
To Enter Memory Location Scan:
1.
From
Marine Standby
mode, press the
MEM/ESC
button.
2.
Press the
SCAN
button. The radio will immediately
begin to scan all pre-assigned memory channels.
The
MEM
icon will show on the LCD, and
MEM
CHAN SCAN
will display on the matrix along with the
memory location.
3.
A signal on any channel will stop the scan for 10
seconds to allow you to listen to the traffic on that
location. After 10 seconds, the radio will resume
scanning.
4.
Press the
Channel Up/Down
button to resume
scanning the
Memory Location Scan
channels
before the 10-second pause has completed or to
change the scan direction.
5.
To EXIT
Memory Location Scan
mode, press the
SCAN
button again. The
MEM
icon will disappear
from the LCD and the radio will return to
Marine
Standby
mode.
MEM
SAME
VOX LOMED
HI
VHF
T
R
A
B
X
C
I
U
Memory Channel Scan
W
ESC
MEM
ENT SETUP
C
MEM/ESC Button
SCAN
ESC
MEM
SCAN Button
500_VHF_Body_v8_MRHH330_ENG_Body 3/26/13 11:13 AM Page 36
