Cobra Marine MR F80B Owner'S Manual Download

Page: 40 / 44

Introduction

Nothing

Comes Close to a Cobra

Product Features

72 English

Product Features

Introduction

Digital Select Calling (DSC)

Operation

Digital Select Calling (DSC)

Operation

If You Receive a Position:

The requested position with the station name and

MMSI

will

show on your screen.
Press the

Enter

button to return to

Standby

mode after you

have noted the station’s position.

NOTE

If the MRF80 is connected properly to your Cobra

chartplotter, you will see the requested position of the

other vessel indicated on the display.

Receiving a Position Request

When you went through the

DSC Setup

process, you set a

position request reply type. (See page 63 to change your

setting.) Depending on the setting you chose, when a

Position Request message is received, your radio will enter

either:

■

The

Auto Reply

mode.

■

The

Manual Reply

mode.

When the Radio is in Auto Reply Mode:

A position request will sound the

Position Request

alarm

and show the name of the requesting station on the LCD.

Your radio will automatically respond. It will send your

position, if you have a

GPS

device connected to your radio,

or NO POS. DATA (no position data), if you do not have a

GPS

device connected.

Press any button to silence the alarm and exit the display.

When the Radio is in the Manual Reply Mode:

A position request message will sound the

Position Request

alarm and show the name of the requesting station. You can

choose to:

■

Reply and send your position.

■

Exit without sending your position.

If You Choose to Reply with Your Position:

Turn the

Channel

knob, or press the microphone

Channel

Up/Down

buttons or press the

Function (F1/F2)

button to

select REPLY.

Press the

Call/Setup

Enter

button to send your

position.

Press any button to return to

Standby

mode.

If You Choose Not to Reply:

Turn the

Channel

knob, or press the microphone

Channel

Up/Down

buttons or press the

Function (F1/F2)

button to

select EXIT.

Press the

Enter

button to exit and return to

Standby

mode without sending your position.

Operating Your Radio

Receiving a Position

Position Request

Reply/Exit

Summary of Contents for MR F80B













































Search results

Summary of Contents for MR F80B

Reviews:

Related manuals for MR F80B

Brands by name

Popular brands

Cobra Marine MR F80B, Owner'S Manual

Search results

Summary of Contents for MR F80B

Reviews:

Related manuals for MR F80B

Brands by name

Popular brands