background image

Nothing Comes Close to a Cobra

®

65

64 English

Operating Your Radio

Operating Your Radio

Call Log and Distress Log

 Call  Log

 will capture the caller’s MMSI identification number and any other data 

included in a DSC message.

NOTE 

Each 

Call Log

 memory can hold up to 20 messages. Once the memory becomes 

full, each new call will erase the oldest call information on a first-in, first-out basis.

NOTE 

The 

Envelope

 Icon will be displayed when calls are received and placed into any 

of the call logs.

n

  The envelope Icon will be shown closed to indicate  

  unread messages.

n

  The envelope Icon will be shown open to indicate that all  

  messages have been read.

   

 To Review Call Log Messages Received  

While In DSC Standby Mode:

  

1.

 Press the 

CALL soft key

 and scroll to 

CALL WAITING

  

   

  and press the 

ENTER

 soft key.

  

2.

 Scroll to highlight DISTRESS LOG or RECEIVED CALLS  

  

 logs.

  

3.

 Press the 

ENTER

 key.

  

4. 

Scroll to highlight a log entry.

  

5.

 Press the

 ENTER

 key to view the log entry.

  

6. 

Press the 

EXIT soft key

 to exit the Position Send mode  

   

  and return the radio to the DSC CALL LOGS Menu.

  

To Delete Call Log Information:

  

1. 

Press the 

CALL soft key

 and scroll to 

CALL WAITING

  

   

  and press the 

ENTER

 soft key.

  

2.

 Scroll to highlight 

DELETE CALL LOGS

.

Advanced Operation

Advanced Operation

All Messages Viewed

Unread Messages

exit         entr

  dsc call log

distress

delete call logs

received calls

EXIT           ENTR

    CALL MENU

POSITION SEND

CALL WAITING

STANDBY

exit         entr

  dsc call log

distress

delete call logs

received calls

exit         entr

 delete call log

distress

    

received calls

   

To Delete Call Log Information 

continued

:

  

3. 

Press the 

ENTER

 key.

  

4.

 Scroll to highlight 

DISTRESS

 or 

RECEIVED CALLS    

   

log entry.

  

5.

 Press the

 ENTER

 key  and confirm delete by pressing the    

  

ENTER

 key.

  

6.

 Press the 

EXIT 

soft key to exit the Position Send mode  

 

   

and return the radio to the 

DELETE CALL LOGS

 Menu.

Test Call

The 

Test Call

 feature allows the user to confirm that the radio is fully operational and that 

the DSC call functions are working properly.
  

1.

 Press the 

CALL soft key

 and scroll to 

TEST CALL

 and    

   

press the 

ENTER

 soft key.

  

2.

 Scroll to highlight a previously entered directory entry  

 

   

or use the 

MANUAL

 entry option.

  

3.

 Press the 

ENTER

 key.

  

4.

 Press the 

ENTER soft key

 to send the Test Call.

  

5.

 The radio will tune to the voice channel previously selected.

  

6.

 Press the 

EXIT soft key

 to exit the Test Call mode and  

 

   

return the radio to the Call Menu.

Alarm In

Allows connection to the alarm output of your chart plotter to alert you when an arrival, off-
course, etc.alarm has been activated.
  

1.

 Connect the 

Blue

 wire on the back panel wire harness to the  

   

  Alarm Output of your plotter (see the operators manual of your  

   

  plotter for connection and use details).

  

2.

 When your plotter outputs the alarm signal (the plotter grounds  

   

  the alarm output), your CobraMarine radio will activate the Alarm  

   

  screen and sound a loud alarm tone.

  

3.

 Pressing any key on your CobraMarine radio will silence the alarm.

  

4.

 If not connecting a chart plotter, be sure to cap off the blue wire  

   

  to prevent false alarms.

exit         entr

 delete dist log

delete distress

    

log?

exit         entr

    call menu

standby

call waiting

test call

exit         entr

  dsc Test call

Manual

mmsi 123456789

friends boat

exit         entr

  dsc Test call

friends boat

     

transmit?

exit         rept

  dsc Test call

friends boat

Elasped time 0:15

waiting for ack

 TW  WX  SCAN  MORE

PLOTTER       EMERG

CHECK

25W

INT 

  

MRF57E_MANL_OPERATION.indd   64-65

12/14/18   2:41 PM

Summary of Contents for MR F57B E
















































Reviews: