22 English
Bluetooth
®
Mode Pairing
and Programming
Operating Your Radio
Operating Your Radio
23
Nothing
Comes Close to a Cobra
®
Bluetooth
®
Mode Pairing
and Programming
4.
You will then see a confirmation of successful
pairing or a notice to try again if pairing did
not occur. The LCD will briefly display the word
“PairEd.”
NOTE
This process only needs to be completed for first
time operation. From then on, as long as your mobile
phone is within 10 meters (30 feet) of the radio, the
two units will “Pair” automatically. A “P” will now
be displayed if you press the
Bluetooth
button and
enter the
Bluetooth
Standby
mode.
Bluetooth
Pairing
Bluetooth
Mode Programming
•
The default settings for how your radio answers and conducts
Bluetooth
mobile
phone calls can be adjusted.
VOX On or Off
The
VOX
function converts the radio microphone’s pickup of
your voice from being controlled by the
PTT
button to being
activated by your voice. When
VOX
is On, the
PTT
button
does not need to be pressed to transmit your voice, and
you can just speak into the microphone.
When
VOX
is Off, you need to press the
PTT
button while
speaking.
To Change Between VOX On and Off:
1.
From the
Bluetooth
Standby
mode, press and hold
Call/Enter/Setup
button to access the Setup menu.
VOX
On/Off will be the first menu item to appear.
2.
Press the
Channel Up
and
Channel Down
buttons.
The display will show the selection of either ON or OFF.
3.
Press the
Call/Enter/Setup
button to confirm
your selection and move to the next
Setup
mode programming.
VOX
Call Tone Alert
If
Call Tone Alert
is set to On, the radio will “ring” with one
of your Cobra selected tones when you receive a call on your
mobile phone. If
Call Tone Alert
is set to Off, the radio will
ring with the default ring tone.
To Set Call Tone On or Off:
1.
Display will show
Call Tone
icon and ON or OFF flashing.
VOX
On/Off will be the first menu item to appear.
2.
Press
Channel UP/Down
button to select ON or OFF.
3.
Press the
Call/Enter/Setup
button to save this entry
and move to the next Setup mode programming.
The
Call Tone
icon will show in the
Standby
mode
when set to ON.
Call Tone Select (Ring Tones)
This setting controls what ring tones is used to alert for
incoming calls on your mobile phone. Ten different ring
tones are available from which to choose.
To Set Call Tone:
1.
From the previous press of the
Call/Enter/Setup
button,
the LCD will display the letter “C” and the current Call Tone
number (01 through 10).
2.
Press the
Channel Up/Down
button to select a different
Call Tone. An example of each call tone will sound for
1.5 seconds.
3.
Press
Call/Enter/Setup
button to save this entry and
move to the next
Setup
mode programming.
Call Tone Alert
Call Tone Select
Bluetooth
Standby Mode
MRHH475EU_MANL_vC.qx:MRHH475_ENG_Body 12/28/09 9:44 AM Page 22
