4
Important Precautions & Instructions
Functions:
Both Mixers are similar, the AUMX6 has two more Mic/Line Inputs
1. Mono microphone or line level input via XLR or ¼” jack.
2. Stereo line input via RCA or ¼” jack connections.
3. Phantom power switch. Adds 48 volts to XLR inputs 1 and 2. Primarily for condenser studio microphones.
4. Phantom power LED, when illuminated there will be phantom power on the XLR inputs.
5. Gain controls for inputs.
6. High tone control for each channel
7. Low tone control for each channel.
8. Effect on and off switch for Mic/Line Channels.
9. Channel volume control after tone and effect controls for all channels.
10. Stereo/USB, switches between the stereo jack/RCA inputs and the MP3 player/computer connection.
11. Main volume control.
12. Headphone volume control.
13. Repeat setting for the built-in echo.
14. Delay setting for the built-in echo.
15. Headphone input socket via 3.5mm jack.
16. Power LED is lit when power is received by the mixer.
17. Clip and signal LEDs. The signal LED lights when a signal is detected, and the clip LED lights when the input is being over driven.
18. MP3 player control buttons.
19. Displays MP3 operating and playing status.
20. USB stick input for playing MP3 files and recording the mixers output to the USB stick.
21. Left and right ¼” jack outputs(unbalanced).
22. Connections to connect to a recording device. Stereo line level on two RCA connections.
23. USB power input. This can be made via the supplied USB cable and a USB 5v power supply or via a computer or laptop.
When connecting to a PC or laptop the mixer acts as a sound card for music play back.
24 MP3/PC switch. This switches the internal sound card on and off.
When connected to a PC the power is supplied via the PC and the mixer works as a sound card. The USB stick input is
not functional when in this mode.
If the power is supplied via an external power supply, then is does not matter the position this switch. There will be no
sound card option.
23
24
