| 2021-07 User manual Minimaxx Wheelchair Push Motor
8
Remove the protection caps (13) first.
Then slide the splices (11) with thumbscrew (12)
onto the pole (17). Push Motor is placed
underneath Minimaxx Wheelchair, so the ends of
the splices are in front of the hub bushings.
Fig. 4
Slide the splices out to each side until the ends
rest in the hub bushings.
Lock the splices onto the pole with the
thumbscrews.
The Push Motor is now mounted on the Minimaxx
Wheelchair frame.
Fig. 5
Mount the Push Motor remote control on
Minimaxx Wheelcha
ir’s
right push handle (23).
Push a suitable spacer into the push handle
tailpipe.
Upper and lower handle bracket is tightened
around the spacer with the two supplied
mounting bolts (4).
Fig. 6
