Field Installation & Test Procedure, 4 Sw itch Dual Antenna Arbitrator
Panel Assembly, Sea Tel TV
Page 5 of 7
Document No
99-145228-A2
Copyright © Sea Tel, Inc 2015 The information contained in this document is proprietary to Sea Tel, Inc.. This document
may not be reproduced or distributed in any form without prior written consent of Sea Tel, Inc.
1.7.
Testing the Dual Antenna System
Arbitrator Test
Tracking LED
1
From your browser, log into Primary LMXP on one browser tab and select the Tools - Position
Antenna page.
2
Verify that Tracking LED is ON in the upper right corner of the top banner.
3
Verify that BLOCKED does not appear in the upper right corner of the top banner under Tracking.
4
Verify that the below decks receivers are producing your TV audio/video programming.
5
Open another tab in your browser, log into the Secondary LMXP and select the Tools - Position
Antenna page.
6
Verify that Tracking LED is ON in the upper right corner of the top banner.
7
Verify that BLOCKED does not appear in the upper right corner of the top banner under Tracking.
8
While near the Dual Antenna Arbitrator panel, select the first tab (Primary LMXP) and click on the
radio button to select “Blocked” in the Arbitrator Test area of the page. You should immediately
hear the coax switches “click” as they switch to route signals from the Secondary antenna to the
distribution.
9
Verify that the below decks receivers are still producing your TV audio/video programming.
10
While near the Dual Antenna Arbitrator panel, click on the radio button to select “Unblocked” in the
Arbitrator Test area of the page. You should NOT hear the coax switches “click”.
