Supported commands
98-150471-A02
Appendix D: Command line interface
D-7
Command line interf
ac
e
D.2.8
status
satellite tx_rf_freq
satellite tx_rf_freq
14.123456
Shows or sets the RF frequency used for tx.
• Valid range:
Ku band: 13.75 GHz to 14.5 GHz.
Ka band: 29 GHz to 30 GHz.
Note
: Configuring the Ku-band tx frequency
automatically configures the L-band frequency:
L-band frequency = Ku-band tx frequency – 12.8
GHz (BUC Lo)
Example:
1308.300000 MHz = 14.108300 GHz
– 12.8 GHz
satellite tx_if_freq
satellite tx_if_freq
1200.123
Shows or sets the IF frequency for tx.
• Valid range:
Ku band: 950 MHz to 1700 MHz.
Ka band: 950 MHz to 1950 MHz
Note
: Configuring the L-band tx frequency
automatically configures the Ku-band frequency:
Ku-band frequency = 12.8 GHz (BUC Lo) + L-band
frequency
Example:
14.108300 GHz = 12.8 GHz +
1308.300000 MHz
a. Relevant for Ku band.
Command
Description
Table D-8: UCLI command:
satellite
(Continued)
Command
Description
status
Shows the sub commands available, including a short
description.
status system
Shows the current status of the SAILOR 900 VSAT High
Power.
status track_all
Shows the current values for all tracking parameters:
• vessel heading
• azimuth relative
• elevation relative
• polarisation skew
• GPS latitude and longitude
status event_list
Shows a list of active events.
Table D-9: UCLI command:
status
SAILOR900HP.book Page 7 Monday, July 18, 2016 12:44 PM
