Maintenance
98-137261-F
Chapter 3: Service & maintenance
21
• NMEA Trace, more information in the next section.
• RF Reception Levels, more information on page 23.
• Installation Tests, more information on page 24.
• Navtex DB Dump, more information on page 26
NMEA Trace tool
To verify the installation of NMEA devices to the SAILOR 6390 Navtex Receiver
you can start the NMEA Trace tool to see whether the connected device on a
selected port receives and sends correct NMEA information. The NMEA Trace
verifies the electrical connection, it does not guarantee that the NMEA sentence
is parsed correctly. The NMEA Trace tool runs independently from the Service
Interface and you can access the SAILOR 6390 Navtex Receiver as in normal
operation.
To start the NMEA Trace tool, do as follows:
1. Press
Show MENU
2. Click
NMEA Trace
3. In the drop down list select which port you want to run an NMEA trace on:
Figure 19: Service Interface, Hide menu
Summary of Contents for Sailor 6390 Navtex
Page 1: ...SAILOR 6390 Navtex Receiver User Manual ...
Page 2: ......
