Operation – SAILOR 6004 Control Panel
98-137261-F
Chapter 2: Operation
11
3. Locate the Warning related to the SAR message in the list and tap next to
ACK to acknowledge the warning.
The warning disappears from the alert list when it is rectified and
acknowledged.
Filters for stations and message types
You can customize the SAILOR 6390 Navtex Receiver to receive Navtex
messages of certain types and from selected coast stations. You can filter
separately for printer output, SAILOR 6004 Control Panel (Display) and INS
installations. You can set up a filter for each of the 3 receiver frequencies. The
filters are not affected by a power cycle. Filter settings can be copied from one
tab to the others, e.g. from
Display
to
Printer
or
INS
.
Filters for stations
The SAILOR 6390 Navtex Receiver can automatically filter messages from coast
stations within a certain range of own position, measured in NM. It can also filter
coast stations manually (default). For a list of stations see the Admiralty List of
Radio Signals and ITU List of Coast stations and Special Service Stations (List IV)
(
).
Note
The alert icon in the right side of the bottom bar always shows the
alert with highest priority, so if other higher priority alerts are
present you may see a different symbol in this area.
Figure 10: Filters for stations and message types
Three tabs for filtering
Summary of Contents for Sailor 6390 Navtex
Page 1: ...SAILOR 6390 Navtex Receiver User Manual ...
Page 2: ......
