COBHAM SAILOR 6249 VHF, User Manual

Page: 32 / 58

Chapter 2: Operation
18 Replay function
Replay function
Replay allows the operator to playback received voice messages in the
loudspeaker. Recording is activated automatically when a signal is received.
Recording is not possible during playback. Up to 60 tracks or 240 seconds
can be handled. During a power cycle the recorded tracks are deleted.
The recorded channel is displayed. The message length is shown in seconds.
The display shows how old the message is. If the 240 s storage limit is
reached, the oldest data is overwritten.
Replaying recorded messages
Press the Replay button (short press). The latest message
(message) is repeated. Information about this message is
shown in the display.
To stop replayin
g the message press the soft key
STOP
.
To rewind
through the recorded messages make a long press on the
Replay button.
To stop replaying
a message press
STOP
or the PTT button on the
speaking device.
If a signal is received while in replay mode the display shows in the
display.
Setup
The following setup pages are described in this section of the manual:
• Radio setup
• Channel setup
• Power Supply
• System setup
• Controller setup