COBHAM SAILOR 6120, Installation Manual

Page: 87 / 116

Chapter 5: Installation check and test
Test the SAILOR 6130 LRIT System 75
5555
Install
ation che
ck
and
5.2 Test the SAILOR 6130 LRIT System
If you have a SAILOR 6130 LRIT System, you may not have anything
connected to your SAILOR 3027, except for a power supply.
However, we recommend testing the signal path. This can be done by
requesting a LESO (LES Operator) in the Inmarsat-C system to perform a
PVT (Performance Verification Test) on your SAILOR 3027 LRIT Terminal.
The LESO returns the result of the test, which is either that the mobile
passed or failed the test. A written result may look like this:
Any further requirements for testing are defined by the Flag administration.
Is the shield of the CAN cable connected
correctly to the ship ground (hull)? SAILOR 3027
mini-C terminal
on
page 29
Is the polarity of power connections
correct? Red wire = DC+, Black wire = DC- Connect power on
page 33
Check item Reference OK
Table 12: Installation check list (Continued)
Test Id Group Start time End time Overall
result
pvt
test
ss
m
subsys
tem
20110128
15:07:45
20110128
15:17:07
finished
pvt