Chapter 3: Troubleshooting
56
Troubleshooting guide
No connection
between
Message
Terminal and
MF/HF radio
The CAN connection does
not work.
Check that the CAN cables
are connected correctly to
the Message Terminal and
the MF/HF radio, and that
they are not damaged.
The MF/HF radio is not
switched on
Check that the MF/HF radio
is switched on and ready.
Other
Switch off the MF/HF radio
and the Message Terminal
and switch them back on.
The Message
Terminal shows
“out of paper”
although there is
paper in the
printer.
The paper is not placed
correctly in the printer.
Adjust the paper to the left
side of the printer.
Problem
Possible cause
Remedy
Summary of Contents for SAILOR 6000B
