100-M0081X1
13 of 29
www.cobham.com/gms
“GetTvMode”
Read the current video output mode.
0 means NTSC
1 means PAL
2 means SECAM
“GetVideoSpec”
Read the current video syntax subset and level.
0
means
MainProfile
@
Main
Level
1
means
4:2:2
Profile
@
Main
Level
“GetAudioSamp”
Read current audio sampling rate. As MPD’s two audio channels can
only work on the same sampling rate, so the reads apply to both of
the audio channels at the same time.
0
means
48k/s
1
means
44.1K/s
2 means 32K/s
“GetVideoPID”
Read current video PID.
“SetVideoPID”
Set current video PID.
e.g. fill 0x01C2 at the left blank item and press the “SetVIdeoPID”
button. It means that the VideoPID is set as 0x01C2.
“GetSelProg”
Read the program number of the current program being played.
e.g. 1 means Program 1 is playing.
“SetSelProg”
Set the number of program which is playing.
e.g. fill 3 at the left blank item and press the “SetSelProg” button. It
means Channel 3 program is playing.
“GetBright”
Read the brightness of current analog video output.
“SetBright”
Set the brightness of current analog video output.
e.g. fill 55 at the left blank item and press the “SetBright” button. It
means Bright=55. 0<=Bright<=100 is available.
“GetContrast”
Read the contrast of current analog video output.
“SetContrast”
Set the contrast of current analog video output.
e.g. fill 55 means Contrast=55. 0<=Contrast<=100 is available.
“GetHue”
Read the hue of current analog video output.
“SetHue”
Set the hue of current analog video output.
e.g. fill 55 means Hue=55. 0<=Hue<=100 is available.
“GetColor”
Read the color of current analog video output.
“SetColor”
Set the color of current analog video output.
e.g. fill 55 means Color=55. 0<=Color<=100 is available.
“GetAudioPID”
Read PID of audio channel 1 and audio channel 2.
Fill 0 at “Channel:” item and press “GetAudioPID”, you can get PID of
audio channel 1.
Fill 1 at “Channel:” item and press “GetAudioPID”, you can get PID of
audio channel 2.
Except for 0 and 1, the others are invalid.
“SetAudioPID”
Set PID of audio channel 1 and audio channel 2.
e.g. fill 0 at “Channel:” item and fill 0x01C2 at “AudioPID” item, then
press “SetAudioPID”. It means set Audio channel 1 PID = 0x01C2.
Fill 1 at “Channel:” item and fill 0x01C2 at “AudioPID” item, then
press “SetAudioPID”, It means set Audio channel 2 PID = 0x01C2.
“GetAudioVolume”
Read the volume of audio channel 1 and audio channel 2.
Fill 0 at “Channel:” item and press “GetAudioVolume”, you can get
PID of audio channel 1.
