COBHAM AVIATOR 200, User Manual

Page: 21 / 126

Chapter 2: Getting started
Establishing a connection 11
2222
G
etting star
ted
3. Select
Enter PIN code
.
4. Enter the Administrator user name and select
OK
.
For information on how to type text in the handset, see How to enter
text in the AVIATOR Wireless Handset on page 46.
5. Enter the Administrator password and select
OK
.
6. Enter the SIM PIN and select
OK.
If the SIM PIN is rejected, see the next section Wrong PIN .
When the PIN is accepted, the SwiftBroadband unit automatically sets up a
SIP profile and assigns the first available local number to the handset, if the
startup option
Auto BGAN SIP
is enabled under
Settings
>
Startup
options
in the handset menu.
Wrong PIN
After entering the user name and password, you have 3 attempts to enter
the PIN, before you are asked to enter the PUK (Pin Unblocking Key). The
PUK is supplied with your SIM card.
Enter the PUK followed by a new PIN of your own choice. The PIN must be
from 4 to 8 digits long.
AVIATOR Wireless Handset ready
When the display shows the handset ready symbol in the upper right
corner, the handset is ready for making a call.
If the handset ready symbol is crossed out you cannot make a call.
The display will normally show a message explaining why the handset is not
ready.
Note This menu item is not available if the PIN has already been
accepted. You can check at
Status > PIN status
to see if the
PIN has been accepted.
Caution!
If you enter a wrong PUK 10 times, the SIM card will no
longer be functional, and you have to contact your
Airtime Provider for a new SIM card.