COBHAM AEM AA30-0 Series, Installation And Operation Manual

Page: 11 / 21

AA30-0xx Expansion Switches
SM73 Installation and Operation Manual
June 19, 2012 Rev: 5.00 Page 2-3
ENG-FORM: 805-0100.DOTX
CONFIDENTIAL AND PROPRIETARY TO ANODYNE ELECTRONICS MANUFACTURING CORP.
2.3.5 Adjustments
The unit is shipped from the factory with all internal adjustments set to the normal test levels. Once installed
in the aircraft, it may be desirable to change some of these settings to best suit the local operating
environment.
2.3.5.1 Sidetone Level (AA30-014 only)
The sidetone level pots can be accessed through holes in the side of the unit.
When the pot is rotated fully counterclockwise the sidetone level will be at its minimum. Rotating the pot
clockwise will increase the level.
Upon satisfactory completion of all performance checks, make the required log entries and
complete the necessary Regulatory Agency paperwork before releasing the aircraft for service.
2.4 Continued Airworthiness
Maintenance of the AA30- 0xx is ‘on condition’ only. Periodic maintenance of this product is not required.
2.5 Accessories Required But Not Supplied
Installation kits are required to complete the installation. Different kits are required depending upon the
model - for information, please contact the Product Support Department at AEM.
2.6 Installation Drawings
The AA30-013 is described as an example of a single user unit, and the AA30-014 as an example of a
dual user unit.
DRAWING REV. DESCRIPTION TYPE
AA30-013
AA30\013\403-0 1.10 Expansion Switch Unit Interconnect
AA30\013\405-0 1.10 Expansion Switch Unit Connector Map
AA30\013\905-0 1.00 Expansion Switch Unit Faceplate
AA30\013\922-0 1.00 Expansion Switch Unit Mech. Installation
AA30-014
AA30\014\403-0 1.00 Expansion Switch Unit with TX Interconnect
AA30\014\405-0 1.00 Expansion Switch Unit with TX Connector Map
AA30\014\905-0 1.00 Expansion Switch Unit with TX Faceplate
AA30\014\922-0 1.10 Expansion Switch Unit with TX Mech. Installation
Section 2.0 ends following above documents